Garmin gWind Race/nWind Connector Adapter Cable Bundle (010-01403-10)
Garmin gWind Race/nWind Connector Adapter Cable Bundle (010-01403-10)
SKU: 010-01403-10
Bajas existencias
WhatsApp
SMS - Text us!
Email Us!
Help Desk
Reseñas
Especificaciones
Garmin gWind Race/nWind Connector Adapter Cable Bundle (010-01403-10)
Introduction
The Garmin gWind Race/nWind Connector Adapter Cable Bundle (model 010-01403-10) solves a common challenge for sailors with existing Nexus marine networks: upgrading to modern wind measurement without a costly, time-consuming system overhaul. This bundle pairs the high-performance gWind Race transducer with a dedicated nWind to gWind connector adapter cable, enabling your boat's existing Nexus mast wiring to work seamlessly with updated wind-sensing technology. For racing yachts and performance cruisers, the result is faster, more reliable wind data while preserving your current network infrastructure and keeping labor costs down during installation.
Key Features
- Complete retrofit bundle includes gWind Race transducer and nWind to gWind adapter cable
- Retains existing Nexus mast cable—no rewiring of main system architecture required
- Delivers precise wind speed measurement and stable wind angle readings for sailing and racing applications
- Compatible with all existing Nexus network installations without firmware changes
- Reduces installation time by eliminating the need to replace entire mast cabling infrastructure
- Durable marine-grade construction engineered for salt spray, UV exposure, and extended freshwater or coastal use
Data Insights
The key advantage of this bundle over full system replacement is operational efficiency. Existing Nexus users can modernize their wind instrumentation while reusing the mast cable—a significant cost factor in marine electronics upgrades. The gWind Race transducer provides the same accuracy and response time as newer standalone installations but integrates into older network infrastructure through the included adapter cable, which bridges the connection protocol differences between legacy nWind and modern gWind hardware. This approach maintains dependable data transmission without single points of failure, keeping your navigation and racing performance information reliable across all wind conditions.
Usage Instructions
Begin by removing the existing nWind transducer from the masthead and following the included installation documentation to mount the gWind Race unit in its place. Connect the new transducer to your Nexus network using the supplied nWind to gWind connector adapter cable, which plugs into the existing Nexus mast cable at the deck junction. Once physically installed, verify communication by checking that wind data appears on your Nexus display within 30 seconds of power-up, then perform the recommended calibration routine to zero your wind instruments for accurate speed and angle readings across all points of sail.
Design and Material
The bundle is purpose-built for retrofit simplicity, with the adapter cable engineered specifically to bridge Nexus legacy hardware and Garmin gWind Race specifications. The connector housing uses marine-grade materials designed to withstand continuous saltwater exposure, UV degradation, and thermal cycling typical of open-water sailing conditions.
- Adapter cable features sealed, corrosion-resistant connectors rated for marine environments
- Wiring jacket uses UV-stabilized polymer sheathing to prevent deterioration in direct sunlight
- gWind Race transducer head incorporates anodized aluminum construction for salt spray resistance
- Complete bundle arrives pre-assembled and ready for installation—no soldering or crimping required
- Cable length accommodates standard mast-to-deck routing on cruising and racing sailboats
- Connector compatibility verified for existing Nexus systems from all manufacturing years
Final Verdict
If you own a Nexus-equipped sailboat and want upgraded wind instrumentation without the expense and disruption of a complete system replacement, the Garmin gWind Race/nWind Connector Adapter Cable Bundle delivers exactly what you need. The combination of modern measurement accuracy, plug-and-play integration, and marine-proven durability makes it the practical choice for sailors who demand reliable performance data without reinventing their entire onboard electronics architecture. Choose this bundle to upgrade your competitive edge while protecting your existing investment in Nexus infrastructure.
En la caja
Connector adapter cable
Propeller installation instructions
¿Tiene una unidad GPS vieja por ahí? El programa Trade In and Up de GPS Nation es una excelente manera de canjear su GPS viejo y usado por crédito para un nuevo GPS. ¡La decisión es completamente suya! Hemos simplificado y optimizado el proceso. Siga estos sencillos pasos y estará en camino de recibir crédito para su nuevo GPS.
1. Obtenga una cotización
Para obtener una cotización gratuita, proporcione el tipo, el fabricante, el modelo y el estado de su GPS. En un plazo de 24 horas, recibirá una cotización por el valor de intercambio de su producto actual. El formulario de intercambio de GPS se encuentra en la parte inferior de esta página.
2. Envíe su(s) producto(s) para comercializarlos
Después de aceptar nuestra oferta, empaquete sus productos de forma segura y envíenoslos utilizando la etiqueta de envío prepaga que le proporcionamos. Le enviaremos un correo electrónico de confirmación cuando su canje llegue a nuestro almacén. Tiene 30 días a partir de la fecha en que complete su canje en línea para enviar el producto a GPS Nation.
3. Realiza tu compra
Una vez que recibamos su producto en nuestro almacén y validemos la condición indicada, le enviaremos un correo electrónico de confirmación. Si elige recibir crédito para un nuevo GPS en gpsnation.com, se emitirá su crédito de la tienda y podrá realizar su compra.
Manual y garantía
Reseñas
Haz una pregunta
Especificaciones
Garmin gWind Race/nWind Connector Adapter Cable Bundle (010-01403-10)
Introduction
The Garmin gWind Race/nWind Connector Adapter Cable Bundle (model 010-01403-10) solves a common challenge for sailors with existing Nexus marine networks: upgrading to modern wind measurement without a costly, time-consuming system overhaul. This bundle pairs the high-performance gWind Race transducer with a dedicated nWind to gWind connector adapter cable, enabling your boat's existing Nexus mast wiring to work seamlessly with updated wind-sensing technology. For racing yachts and performance cruisers, the result is faster, more reliable wind data while preserving your current network infrastructure and keeping labor costs down during installation.
Key Features
- Complete retrofit bundle includes gWind Race transducer and nWind to gWind adapter cable
- Retains existing Nexus mast cable—no rewiring of main system architecture required
- Delivers precise wind speed measurement and stable wind angle readings for sailing and racing applications
- Compatible with all existing Nexus network installations without firmware changes
- Reduces installation time by eliminating the need to replace entire mast cabling infrastructure
- Durable marine-grade construction engineered for salt spray, UV exposure, and extended freshwater or coastal use
Data Insights
The key advantage of this bundle over full system replacement is operational efficiency. Existing Nexus users can modernize their wind instrumentation while reusing the mast cable—a significant cost factor in marine electronics upgrades. The gWind Race transducer provides the same accuracy and response time as newer standalone installations but integrates into older network infrastructure through the included adapter cable, which bridges the connection protocol differences between legacy nWind and modern gWind hardware. This approach maintains dependable data transmission without single points of failure, keeping your navigation and racing performance information reliable across all wind conditions.
Usage Instructions
Begin by removing the existing nWind transducer from the masthead and following the included installation documentation to mount the gWind Race unit in its place. Connect the new transducer to your Nexus network using the supplied nWind to gWind connector adapter cable, which plugs into the existing Nexus mast cable at the deck junction. Once physically installed, verify communication by checking that wind data appears on your Nexus display within 30 seconds of power-up, then perform the recommended calibration routine to zero your wind instruments for accurate speed and angle readings across all points of sail.
Design and Material
The bundle is purpose-built for retrofit simplicity, with the adapter cable engineered specifically to bridge Nexus legacy hardware and Garmin gWind Race specifications. The connector housing uses marine-grade materials designed to withstand continuous saltwater exposure, UV degradation, and thermal cycling typical of open-water sailing conditions.
- Adapter cable features sealed, corrosion-resistant connectors rated for marine environments
- Wiring jacket uses UV-stabilized polymer sheathing to prevent deterioration in direct sunlight
- gWind Race transducer head incorporates anodized aluminum construction for salt spray resistance
- Complete bundle arrives pre-assembled and ready for installation—no soldering or crimping required
- Cable length accommodates standard mast-to-deck routing on cruising and racing sailboats
- Connector compatibility verified for existing Nexus systems from all manufacturing years
Final Verdict
If you own a Nexus-equipped sailboat and want upgraded wind instrumentation without the expense and disruption of a complete system replacement, the Garmin gWind Race/nWind Connector Adapter Cable Bundle delivers exactly what you need. The combination of modern measurement accuracy, plug-and-play integration, and marine-proven durability makes it the practical choice for sailors who demand reliable performance data without reinventing their entire onboard electronics architecture. Choose this bundle to upgrade your competitive edge while protecting your existing investment in Nexus infrastructure.
En la caja
Connector adapter cable
Propeller installation instructions
Programa de canje
¿Tiene una unidad GPS vieja por ahí? El programa Trade In and Up de GPS Nation es una excelente manera de canjear su GPS viejo y usado por crédito para un nuevo GPS. ¡La decisión es completamente suya! Hemos simplificado y optimizado el proceso. Siga estos sencillos pasos y estará en camino de recibir crédito para su nuevo GPS.
1. Obtenga una cotización
Para obtener una cotización gratuita, proporcione el tipo, el fabricante, el modelo y el estado de su GPS. En un plazo de 24 horas, recibirá una cotización por el valor de intercambio de su producto actual. El formulario de intercambio de GPS se encuentra en la parte inferior de esta página.
2. Envíe su(s) producto(s) para comercializarlos
Después de aceptar nuestra oferta, empaquete sus productos de forma segura y envíenoslos utilizando la etiqueta de envío prepaga que le proporcionamos. Le enviaremos un correo electrónico de confirmación cuando su canje llegue a nuestro almacén. Tiene 30 días a partir de la fecha en que complete su canje en línea para enviar el producto a GPS Nation.
3. Realiza tu compra
Una vez que recibamos su producto en nuestro almacén y validemos la condición indicada, le enviaremos un correo electrónico de confirmación. Si elige recibir crédito para un nuevo GPS en gpsnation.com, se emitirá su crédito de la tienda y podrá realizar su compra.
Manual y garantía
Descripción general
Garmin gWind Race/nWind Connector Adapter Cable Bundle (010-01403-10)
Introduction
The Garmin gWind Race/nWind Connector Adapter Cable Bundle (model 010-01403-10) solves a common challenge for sailors with existing Nexus marine networks: upgrading to modern wind measurement without a costly, time-consuming system overhaul. This bundle pairs the high-performance gWind Race transducer with a dedicated nWind to gWind connector adapter cable, enabling your boat's existing Nexus mast wiring to work seamlessly with updated wind-sensing technology. For racing yachts and performance cruisers, the result is faster, more reliable wind data while preserving your current network infrastructure and keeping labor costs down during installation.
Key Features
- Complete retrofit bundle includes gWind Race transducer and nWind to gWind adapter cable
- Retains existing Nexus mast cable—no rewiring of main system architecture required
- Delivers precise wind speed measurement and stable wind angle readings for sailing and racing applications
- Compatible with all existing Nexus network installations without firmware changes
- Reduces installation time by eliminating the need to replace entire mast cabling infrastructure
- Durable marine-grade construction engineered for salt spray, UV exposure, and extended freshwater or coastal use
Data Insights
The key advantage of this bundle over full system replacement is operational efficiency. Existing Nexus users can modernize their wind instrumentation while reusing the mast cable—a significant cost factor in marine electronics upgrades. The gWind Race transducer provides the same accuracy and response time as newer standalone installations but integrates into older network infrastructure through the included adapter cable, which bridges the connection protocol differences between legacy nWind and modern gWind hardware. This approach maintains dependable data transmission without single points of failure, keeping your navigation and racing performance information reliable across all wind conditions.
Usage Instructions
Begin by removing the existing nWind transducer from the masthead and following the included installation documentation to mount the gWind Race unit in its place. Connect the new transducer to your Nexus network using the supplied nWind to gWind connector adapter cable, which plugs into the existing Nexus mast cable at the deck junction. Once physically installed, verify communication by checking that wind data appears on your Nexus display within 30 seconds of power-up, then perform the recommended calibration routine to zero your wind instruments for accurate speed and angle readings across all points of sail.
Design and Material
The bundle is purpose-built for retrofit simplicity, with the adapter cable engineered specifically to bridge Nexus legacy hardware and Garmin gWind Race specifications. The connector housing uses marine-grade materials designed to withstand continuous saltwater exposure, UV degradation, and thermal cycling typical of open-water sailing conditions.
- Adapter cable features sealed, corrosion-resistant connectors rated for marine environments
- Wiring jacket uses UV-stabilized polymer sheathing to prevent deterioration in direct sunlight
- gWind Race transducer head incorporates anodized aluminum construction for salt spray resistance
- Complete bundle arrives pre-assembled and ready for installation—no soldering or crimping required
- Cable length accommodates standard mast-to-deck routing on cruising and racing sailboats
- Connector compatibility verified for existing Nexus systems from all manufacturing years
Final Verdict
If you own a Nexus-equipped sailboat and want upgraded wind instrumentation without the expense and disruption of a complete system replacement, the Garmin gWind Race/nWind Connector Adapter Cable Bundle delivers exactly what you need. The combination of modern measurement accuracy, plug-and-play integration, and marine-proven durability makes it the practical choice for sailors who demand reliable performance data without reinventing their entire onboard electronics architecture. Choose this bundle to upgrade your competitive edge while protecting your existing investment in Nexus infrastructure.
