Garmin Anti-Fog Kit for VIRB Ultra (010-12389-07)
Garmin Anti-Fog Kit for VIRB Ultra (010-12389-07)
Model Number: 010-12389-07
In stock
WhatsApp
SMS - Text us!
Email Us!
Help Desk
Tech Specs
Garmin Anti-Fog Kit for VIRB Ultra (010-12389-07): Crystal-Clear Action Camera Footage in Any Condition
Introduction
Fog-covered lenses end recording sessions prematurely for action camera users in humid, cold, or coastal environments. The Garmin Anti-Fog Kit for VIRB Ultra (model 010-12389-07) solves this problem directly by inserting moisture-absorbing inserts into your camera housing before recording. Designed exclusively for the VIRB Ultra 30 and VIRB Ultra 30 Aviation In-cockpit Bundle, this kit maintains lens clarity in exactly the demanding conditions—water sports, mountain climbing, aviation operations, and tropical settings—where fogging typically ruins footage.
Key Features
- Reduces lens fogging by up to 95% in humid conditions, maintaining optical clarity without chemical coatings or external accessories
- Compatible with Garmin VIRB Ultra 30 and VIRB Ultra 30 Aviation In-cockpit Bundle camera models
- Moisture-absorbing insert design requires no tools or complex installation—inserts seat directly into camera housing
- Compact form factor fits inside camera housing without obstructing lens, image sensor, or camera buttons
- Lightweight construction adds negligible weight to your camera setup, preserving portability for backcountry and aerial applications
- Replaceable inserts accommodate varying environmental conditions—swap as humidity exposure increases or after extended use
Data Insights
Testing demonstrates that the anti-fog kit maintains lens clarity up to 95% more effectively than unprotected lenses in high-humidity environments. This performance level directly translates to smoother, artifact-free video and clearer still imagery, particularly in environments where temperature differentials create rapid condensation—such as moving from heated aircraft cabins into cold air, or from cool water to warm deck surfaces. Users recording in these transition zones report significantly fewer footage interruptions and restarts due to lens obstruction.
Usage Instructions
Before recording, ensure your camera body and lens interior are completely dry. Insert the anti-fog pads into your VIRB Ultra 30 housing in the designated slots, then power on the camera normally—no recalibration needed. The inserts absorb ambient moisture passively throughout your recording session. For extended use in high-humidity environments (coastal areas, rainforests, or water sports), replace inserts after 4–6 hours of continuous operation, or when you notice reduced fog prevention effectiveness. Store unused inserts in a dry location.
Design & Material
The anti-fog kit employs a minimalist engineering approach: small, rectangular silica-based inserts that slot into the camera housing's interior cavity. This design leaves all external controls, ports, and the lens barrel completely unobstructed, preserving full camera functionality and ease of use.
- High-performance silica gel inserts engineered specifically for continuous moisture absorption in sealed camera environments
- Precision-cut dimensions ensure secure fit within VIRB Ultra 30 housing without rattling or shifting during use
- Inert, non-toxic moisture-absorbing material poses no risk to camera electronics or optics if accidentally contacted
- Durable polymeric carriers protect gel inserts from degradation and allow for repeated installation and removal cycles
- Lightweight construction (negligible grams per insert) maintains camera weight and balance for handheld, mounted, and aerial applications
- Weather-sealed design allows inserts to perform reliably in temperature ranges from 0°F to 120°F and humidity levels up to 95%
Final Verdict
The Garmin Anti-Fog Kit for VIRB Ultra (010-12389-07) is a practical solution for anyone recording action footage in humid, cold, or transitional environments where lens fogging currently interrupts shooting. It works passively, requires no power or external equipment, and costs far less than replacement cameras or extended post-production work to salvage unusable footage. If your VIRB Ultra 30 ventures into moisture-prone settings, this kit eliminates a preventable failure mode. Add it to your camera kit now.
In The Box
Garmin Anti-Fog Kit (VIRB Ultra)
Manual & Warranty
Garmin Warranty
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Reviews
Ask a Question
Tech Specs
Garmin Anti-Fog Kit for VIRB Ultra (010-12389-07): Crystal-Clear Action Camera Footage in Any Condition
Introduction
Fog-covered lenses end recording sessions prematurely for action camera users in humid, cold, or coastal environments. The Garmin Anti-Fog Kit for VIRB Ultra (model 010-12389-07) solves this problem directly by inserting moisture-absorbing inserts into your camera housing before recording. Designed exclusively for the VIRB Ultra 30 and VIRB Ultra 30 Aviation In-cockpit Bundle, this kit maintains lens clarity in exactly the demanding conditions—water sports, mountain climbing, aviation operations, and tropical settings—where fogging typically ruins footage.
Key Features
- Reduces lens fogging by up to 95% in humid conditions, maintaining optical clarity without chemical coatings or external accessories
- Compatible with Garmin VIRB Ultra 30 and VIRB Ultra 30 Aviation In-cockpit Bundle camera models
- Moisture-absorbing insert design requires no tools or complex installation—inserts seat directly into camera housing
- Compact form factor fits inside camera housing without obstructing lens, image sensor, or camera buttons
- Lightweight construction adds negligible weight to your camera setup, preserving portability for backcountry and aerial applications
- Replaceable inserts accommodate varying environmental conditions—swap as humidity exposure increases or after extended use
Data Insights
Testing demonstrates that the anti-fog kit maintains lens clarity up to 95% more effectively than unprotected lenses in high-humidity environments. This performance level directly translates to smoother, artifact-free video and clearer still imagery, particularly in environments where temperature differentials create rapid condensation—such as moving from heated aircraft cabins into cold air, or from cool water to warm deck surfaces. Users recording in these transition zones report significantly fewer footage interruptions and restarts due to lens obstruction.
Usage Instructions
Before recording, ensure your camera body and lens interior are completely dry. Insert the anti-fog pads into your VIRB Ultra 30 housing in the designated slots, then power on the camera normally—no recalibration needed. The inserts absorb ambient moisture passively throughout your recording session. For extended use in high-humidity environments (coastal areas, rainforests, or water sports), replace inserts after 4–6 hours of continuous operation, or when you notice reduced fog prevention effectiveness. Store unused inserts in a dry location.
Design & Material
The anti-fog kit employs a minimalist engineering approach: small, rectangular silica-based inserts that slot into the camera housing's interior cavity. This design leaves all external controls, ports, and the lens barrel completely unobstructed, preserving full camera functionality and ease of use.
- High-performance silica gel inserts engineered specifically for continuous moisture absorption in sealed camera environments
- Precision-cut dimensions ensure secure fit within VIRB Ultra 30 housing without rattling or shifting during use
- Inert, non-toxic moisture-absorbing material poses no risk to camera electronics or optics if accidentally contacted
- Durable polymeric carriers protect gel inserts from degradation and allow for repeated installation and removal cycles
- Lightweight construction (negligible grams per insert) maintains camera weight and balance for handheld, mounted, and aerial applications
- Weather-sealed design allows inserts to perform reliably in temperature ranges from 0°F to 120°F and humidity levels up to 95%
Final Verdict
The Garmin Anti-Fog Kit for VIRB Ultra (010-12389-07) is a practical solution for anyone recording action footage in humid, cold, or transitional environments where lens fogging currently interrupts shooting. It works passively, requires no power or external equipment, and costs far less than replacement cameras or extended post-production work to salvage unusable footage. If your VIRB Ultra 30 ventures into moisture-prone settings, this kit eliminates a preventable failure mode. Add it to your camera kit now.
In The Box
Garmin Anti-Fog Kit (VIRB Ultra)
Manual & Warranty
Trade-In
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Overview
Garmin Anti-Fog Kit for VIRB Ultra (010-12389-07): Crystal-Clear Action Camera Footage in Any Condition
Introduction
Fog-covered lenses end recording sessions prematurely for action camera users in humid, cold, or coastal environments. The Garmin Anti-Fog Kit for VIRB Ultra (model 010-12389-07) solves this problem directly by inserting moisture-absorbing inserts into your camera housing before recording. Designed exclusively for the VIRB Ultra 30 and VIRB Ultra 30 Aviation In-cockpit Bundle, this kit maintains lens clarity in exactly the demanding conditions—water sports, mountain climbing, aviation operations, and tropical settings—where fogging typically ruins footage.
Key Features
- Reduces lens fogging by up to 95% in humid conditions, maintaining optical clarity without chemical coatings or external accessories
- Compatible with Garmin VIRB Ultra 30 and VIRB Ultra 30 Aviation In-cockpit Bundle camera models
- Moisture-absorbing insert design requires no tools or complex installation—inserts seat directly into camera housing
- Compact form factor fits inside camera housing without obstructing lens, image sensor, or camera buttons
- Lightweight construction adds negligible weight to your camera setup, preserving portability for backcountry and aerial applications
- Replaceable inserts accommodate varying environmental conditions—swap as humidity exposure increases or after extended use
Data Insights
Testing demonstrates that the anti-fog kit maintains lens clarity up to 95% more effectively than unprotected lenses in high-humidity environments. This performance level directly translates to smoother, artifact-free video and clearer still imagery, particularly in environments where temperature differentials create rapid condensation—such as moving from heated aircraft cabins into cold air, or from cool water to warm deck surfaces. Users recording in these transition zones report significantly fewer footage interruptions and restarts due to lens obstruction.
Usage Instructions
Before recording, ensure your camera body and lens interior are completely dry. Insert the anti-fog pads into your VIRB Ultra 30 housing in the designated slots, then power on the camera normally—no recalibration needed. The inserts absorb ambient moisture passively throughout your recording session. For extended use in high-humidity environments (coastal areas, rainforests, or water sports), replace inserts after 4–6 hours of continuous operation, or when you notice reduced fog prevention effectiveness. Store unused inserts in a dry location.
Design & Material
The anti-fog kit employs a minimalist engineering approach: small, rectangular silica-based inserts that slot into the camera housing's interior cavity. This design leaves all external controls, ports, and the lens barrel completely unobstructed, preserving full camera functionality and ease of use.
- High-performance silica gel inserts engineered specifically for continuous moisture absorption in sealed camera environments
- Precision-cut dimensions ensure secure fit within VIRB Ultra 30 housing without rattling or shifting during use
- Inert, non-toxic moisture-absorbing material poses no risk to camera electronics or optics if accidentally contacted
- Durable polymeric carriers protect gel inserts from degradation and allow for repeated installation and removal cycles
- Lightweight construction (negligible grams per insert) maintains camera weight and balance for handheld, mounted, and aerial applications
- Weather-sealed design allows inserts to perform reliably in temperature ranges from 0°F to 120°F and humidity levels up to 95%
Final Verdict
The Garmin Anti-Fog Kit for VIRB Ultra (010-12389-07) is a practical solution for anyone recording action footage in humid, cold, or transitional environments where lens fogging currently interrupts shooting. It works passively, requires no power or external equipment, and costs far less than replacement cameras or extended post-production work to salvage unusable footage. If your VIRB Ultra 30 ventures into moisture-prone settings, this kit eliminates a preventable failure mode. Add it to your camera kit now.
