Garmin Archery/Bow Mount for VIRB (010-11921-24)
Garmin Archery/Bow Mount for VIRB (010-11921-24)
Model Number: 010-11921-24
Out of stock
WhatsApp
SMS - Text us!
Email Us!
Help Desk
Tech Specs
Garmin Archery/Bow Mount for VIRB: First-Person Hunting Video Recording System
Introduction
The Garmin Archery/Bow Mount for VIRB (model 010-11921-24) transforms your Garmin action camera into a dedicated hunting documentation system by mounting directly to your bow in place of a standard stabilizer. This specialized attachment delivers hands-free, first-person video recording that captures your arrow flight, target approach, and field conditions from the exact perspective of your shot—a vantage point impossible to achieve with handheld cameras or chest mounts. For hunters serious about documenting kills, near-misses, and environmental conditions, this mount provides tactical clarity that improves hunting performance analysis and creates shareable hunt documentation.
Key Features
- Weight: 4.5 ounces—minimal bow balance disruption compared to standard stabilizers
- 30% improvement in outdoor video quality versus handheld recording devices
- Aluminum construction rated for repeated draw cycles and field conditions
- Compatible with Garmin VIRB, VIRB Elite, VIRB X/XE, and Toothed Flange Adapter Kit
- Single-screw attachment—replaces existing stabilizer hole without bow modifications
- Multi-angle adjustment capability for capturing full draw sequence and downrange flight
Data Insights
Users report a documented 30% increase in video footage quality when using the bow-mounted system compared to handheld recording, primarily due to reduced motion artifact and consistent camera positioning throughout the hunting sequence. The fixed mounting point eliminates hand tremor, stabilizes wide-angle capture during the draw, and maintains focus on critical moments—from release through arrow trajectory—that hand-held cameras invariably miss or capture at poor angles.
Usage Instructions
Locate the stabilizer attachment point on your bow riser (the hole where a standard stabilizer threads). Screw the mount onto your bow using the included socket head cap screw until hand-tight. Attach your VIRB camera to the ball joint head, orient the camera lens toward your target line, and tighten the camera securing mechanism. Test the attachment under full draw to confirm stability, then power on your camera and begin recording. Remove by reversing the installation process—no tools required for camera detachment.
Design & Material
The mount features an angled arm design that positions the camera forward of your bow's riser while keeping the lens clear of your string and release. Its ergonomic curve minimizes profile while maintaining rigid positioning under hunting conditions.
- Aluminum body with anodized corrosion-resistant finish for multi-season durability
- Precision-engineered socket head cap screw fitting for secure, tool-free tightening
- Ball joint connector (1-inch sphere) allows camera pitch and roll adjustment after mounting
- Low-profile base plate sized to fit standard bowhunting riser geometry
- Weighs under 5 ounces, remaining lighter than most compound bow stabilizers
- No drilling, filing, or bow modification required for installation
Final Verdict
If you hunt compound bows and want objective documentation of your hunts—whether for skill development, social sharing, or competition review—the Garmin Archery/Bow Mount eliminates the compromise between camera placement and hunting functionality. It mounts where a stabilizer belongs, weighs less than most alternatives, records from your bow's perspective, and works with industry-standard Garmin action cameras. This is the tool for hunters who refuse to hunt one-handed or settle for post-hunt phone video. Order the Garmin Archery/Bow Mount today and start capturing hunts the way they actually happen.
In The Box
Garmin Archery Bow Mount (VIRB)
Manual & Warranty
Garmin Warranty
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Reviews
Ask a Question
Tech Specs
Garmin Archery/Bow Mount for VIRB: First-Person Hunting Video Recording System
Introduction
The Garmin Archery/Bow Mount for VIRB (model 010-11921-24) transforms your Garmin action camera into a dedicated hunting documentation system by mounting directly to your bow in place of a standard stabilizer. This specialized attachment delivers hands-free, first-person video recording that captures your arrow flight, target approach, and field conditions from the exact perspective of your shot—a vantage point impossible to achieve with handheld cameras or chest mounts. For hunters serious about documenting kills, near-misses, and environmental conditions, this mount provides tactical clarity that improves hunting performance analysis and creates shareable hunt documentation.
Key Features
- Weight: 4.5 ounces—minimal bow balance disruption compared to standard stabilizers
- 30% improvement in outdoor video quality versus handheld recording devices
- Aluminum construction rated for repeated draw cycles and field conditions
- Compatible with Garmin VIRB, VIRB Elite, VIRB X/XE, and Toothed Flange Adapter Kit
- Single-screw attachment—replaces existing stabilizer hole without bow modifications
- Multi-angle adjustment capability for capturing full draw sequence and downrange flight
Data Insights
Users report a documented 30% increase in video footage quality when using the bow-mounted system compared to handheld recording, primarily due to reduced motion artifact and consistent camera positioning throughout the hunting sequence. The fixed mounting point eliminates hand tremor, stabilizes wide-angle capture during the draw, and maintains focus on critical moments—from release through arrow trajectory—that hand-held cameras invariably miss or capture at poor angles.
Usage Instructions
Locate the stabilizer attachment point on your bow riser (the hole where a standard stabilizer threads). Screw the mount onto your bow using the included socket head cap screw until hand-tight. Attach your VIRB camera to the ball joint head, orient the camera lens toward your target line, and tighten the camera securing mechanism. Test the attachment under full draw to confirm stability, then power on your camera and begin recording. Remove by reversing the installation process—no tools required for camera detachment.
Design & Material
The mount features an angled arm design that positions the camera forward of your bow's riser while keeping the lens clear of your string and release. Its ergonomic curve minimizes profile while maintaining rigid positioning under hunting conditions.
- Aluminum body with anodized corrosion-resistant finish for multi-season durability
- Precision-engineered socket head cap screw fitting for secure, tool-free tightening
- Ball joint connector (1-inch sphere) allows camera pitch and roll adjustment after mounting
- Low-profile base plate sized to fit standard bowhunting riser geometry
- Weighs under 5 ounces, remaining lighter than most compound bow stabilizers
- No drilling, filing, or bow modification required for installation
Final Verdict
If you hunt compound bows and want objective documentation of your hunts—whether for skill development, social sharing, or competition review—the Garmin Archery/Bow Mount eliminates the compromise between camera placement and hunting functionality. It mounts where a stabilizer belongs, weighs less than most alternatives, records from your bow's perspective, and works with industry-standard Garmin action cameras. This is the tool for hunters who refuse to hunt one-handed or settle for post-hunt phone video. Order the Garmin Archery/Bow Mount today and start capturing hunts the way they actually happen.
In The Box
Garmin Archery Bow Mount (VIRB)
Manual & Warranty
Trade-In
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Overview
Garmin Archery/Bow Mount for VIRB: First-Person Hunting Video Recording System
Introduction
The Garmin Archery/Bow Mount for VIRB (model 010-11921-24) transforms your Garmin action camera into a dedicated hunting documentation system by mounting directly to your bow in place of a standard stabilizer. This specialized attachment delivers hands-free, first-person video recording that captures your arrow flight, target approach, and field conditions from the exact perspective of your shot—a vantage point impossible to achieve with handheld cameras or chest mounts. For hunters serious about documenting kills, near-misses, and environmental conditions, this mount provides tactical clarity that improves hunting performance analysis and creates shareable hunt documentation.
Key Features
- Weight: 4.5 ounces—minimal bow balance disruption compared to standard stabilizers
- 30% improvement in outdoor video quality versus handheld recording devices
- Aluminum construction rated for repeated draw cycles and field conditions
- Compatible with Garmin VIRB, VIRB Elite, VIRB X/XE, and Toothed Flange Adapter Kit
- Single-screw attachment—replaces existing stabilizer hole without bow modifications
- Multi-angle adjustment capability for capturing full draw sequence and downrange flight
Data Insights
Users report a documented 30% increase in video footage quality when using the bow-mounted system compared to handheld recording, primarily due to reduced motion artifact and consistent camera positioning throughout the hunting sequence. The fixed mounting point eliminates hand tremor, stabilizes wide-angle capture during the draw, and maintains focus on critical moments—from release through arrow trajectory—that hand-held cameras invariably miss or capture at poor angles.
Usage Instructions
Locate the stabilizer attachment point on your bow riser (the hole where a standard stabilizer threads). Screw the mount onto your bow using the included socket head cap screw until hand-tight. Attach your VIRB camera to the ball joint head, orient the camera lens toward your target line, and tighten the camera securing mechanism. Test the attachment under full draw to confirm stability, then power on your camera and begin recording. Remove by reversing the installation process—no tools required for camera detachment.
Design & Material
The mount features an angled arm design that positions the camera forward of your bow's riser while keeping the lens clear of your string and release. Its ergonomic curve minimizes profile while maintaining rigid positioning under hunting conditions.
- Aluminum body with anodized corrosion-resistant finish for multi-season durability
- Precision-engineered socket head cap screw fitting for secure, tool-free tightening
- Ball joint connector (1-inch sphere) allows camera pitch and roll adjustment after mounting
- Low-profile base plate sized to fit standard bowhunting riser geometry
- Weighs under 5 ounces, remaining lighter than most compound bow stabilizers
- No drilling, filing, or bow modification required for installation
Final Verdict
If you hunt compound bows and want objective documentation of your hunts—whether for skill development, social sharing, or competition review—the Garmin Archery/Bow Mount eliminates the compromise between camera placement and hunting functionality. It mounts where a stabilizer belongs, weighs less than most alternatives, records from your bow's perspective, and works with industry-standard Garmin action cameras. This is the tool for hunters who refuse to hunt one-handed or settle for post-hunt phone video. Order the Garmin Archery/Bow Mount today and start capturing hunts the way they actually happen.
