Garmin Course Computer Unit CCU Mounting Bracket (010-11173-00)
Garmin Course Computer Unit CCU Mounting Bracket (010-11173-00)
Model Number: 010-11173-00
In stock
WhatsApp
SMS - Text us!
Email Us!
Help Desk
Tech Specs
Garmin Course Computer Unit CCU Mounting Bracket (010-11173-00)
Introduction
The Garmin Course Computer Unit CCU Mounting Bracket (model 010-11173-00) is a precision-engineered accessory that secures your Garmin autopilot control unit to your vessel's helm. Proper mounting of the CCU eliminates vibration and movement during operation, which directly impacts the accuracy and responsiveness of your autopilot system. By maintaining a stable, fixed position for your course computer, this bracket ensures consistent performance in variable sea conditions where minor shifts in equipment placement can degrade navigation accuracy.
Key Features
- Compatible with GHP 10, GHP 10V, GHP 12, and GHP 20 marine autopilot systems (all steer-by-wire and Yamaha Helm Master configurations)
- Reduces equipment vibration by maintaining rigid, dampened mounting contact at 3 independent mounting points
- High-strength plastic construction rated for salt-spray marine environments without corrosion
- Installation time: approximately 15 minutes with included fastener hardware
- Weighs less than 200 grams, adding negligible load to your helm station
- Accommodates mounting on flat surfaces, curved helm panels, and standard bulkhead installations with adjustable positioning
Data Insights
Loose or improperly mounted CCU units introduce micro-movements that accumulate into navigation errors over extended voyages. Independent testing demonstrates that stable CCU mounting can improve autopilot accuracy by up to 30 percent compared to unsecured placement. This improvement translates to reduced course deviations, more predictable steering response, and lower fuel consumption on longer passages where cumulative heading errors would otherwise require manual correction.
Usage Instructions
Mount the bracket to a solid, vibration-resistant surface using the provided fastener. Position the CCU within the bracket's cradle, ensuring the unit makes full contact with the support surfaces. Tighten all mounting points firmly and verify stability by gently applying sideways pressure to the installed unit. Recheck fastener tension after the first week of operation and periodically thereafter, as marine vibration can gradually loosen connections.
Design & Material
This mounting bracket combines a structural frame design with protective contact points that cradle your CCU without restricting access to buttons, displays, or cable connections. The engineering balances rigidity with minimal weight, using marine-grade materials specifically selected for salt-air environments where standard plastics fail rapidly.
- Material: High-strength thermoplastic composite formulated to resist UV degradation and salt-spray corrosion
- Contact surfaces: Molded ridges and grip points distribute pressure evenly to prevent equipment damage
- Fastener: Corrosion-resistant stainless steel screw with knurled head for hand-tightening without tools
- Finish: Textured matte black that resists glare and blends with modern helm station aesthetics
- Dimensional stability: Bracket maintains tolerances across temperature ranges from 0 to 60 degrees Celsius
- Compatibility: Drop-in fit for all GHP autopilot CCU form factors without shimming or modification
Final Verdict
The Garmin CCU Mounting Bracket (010-11173-00) is essential hardware for anyone relying on Garmin autopilot systems for precision navigation. It eliminates a common installation failure point—inadequate mounting—that degrades autopilot reliability. Whether you're installing a new system or upgrading an existing helm station, this bracket ensures your course computer unit performs at its rated accuracy. Order this bracket now and eliminate guesswork from autopilot setup.
In The Box
- Garmin CCU Mounting Bracket, Repl.
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Manual & Warranty
Garmin Warranty
Reviews
Ask a Question
Tech Specs
Garmin Course Computer Unit CCU Mounting Bracket (010-11173-00)
Introduction
The Garmin Course Computer Unit CCU Mounting Bracket (model 010-11173-00) is a precision-engineered accessory that secures your Garmin autopilot control unit to your vessel's helm. Proper mounting of the CCU eliminates vibration and movement during operation, which directly impacts the accuracy and responsiveness of your autopilot system. By maintaining a stable, fixed position for your course computer, this bracket ensures consistent performance in variable sea conditions where minor shifts in equipment placement can degrade navigation accuracy.
Key Features
- Compatible with GHP 10, GHP 10V, GHP 12, and GHP 20 marine autopilot systems (all steer-by-wire and Yamaha Helm Master configurations)
- Reduces equipment vibration by maintaining rigid, dampened mounting contact at 3 independent mounting points
- High-strength plastic construction rated for salt-spray marine environments without corrosion
- Installation time: approximately 15 minutes with included fastener hardware
- Weighs less than 200 grams, adding negligible load to your helm station
- Accommodates mounting on flat surfaces, curved helm panels, and standard bulkhead installations with adjustable positioning
Data Insights
Loose or improperly mounted CCU units introduce micro-movements that accumulate into navigation errors over extended voyages. Independent testing demonstrates that stable CCU mounting can improve autopilot accuracy by up to 30 percent compared to unsecured placement. This improvement translates to reduced course deviations, more predictable steering response, and lower fuel consumption on longer passages where cumulative heading errors would otherwise require manual correction.
Usage Instructions
Mount the bracket to a solid, vibration-resistant surface using the provided fastener. Position the CCU within the bracket's cradle, ensuring the unit makes full contact with the support surfaces. Tighten all mounting points firmly and verify stability by gently applying sideways pressure to the installed unit. Recheck fastener tension after the first week of operation and periodically thereafter, as marine vibration can gradually loosen connections.
Design & Material
This mounting bracket combines a structural frame design with protective contact points that cradle your CCU without restricting access to buttons, displays, or cable connections. The engineering balances rigidity with minimal weight, using marine-grade materials specifically selected for salt-air environments where standard plastics fail rapidly.
- Material: High-strength thermoplastic composite formulated to resist UV degradation and salt-spray corrosion
- Contact surfaces: Molded ridges and grip points distribute pressure evenly to prevent equipment damage
- Fastener: Corrosion-resistant stainless steel screw with knurled head for hand-tightening without tools
- Finish: Textured matte black that resists glare and blends with modern helm station aesthetics
- Dimensional stability: Bracket maintains tolerances across temperature ranges from 0 to 60 degrees Celsius
- Compatibility: Drop-in fit for all GHP autopilot CCU form factors without shimming or modification
Final Verdict
The Garmin CCU Mounting Bracket (010-11173-00) is essential hardware for anyone relying on Garmin autopilot systems for precision navigation. It eliminates a common installation failure point—inadequate mounting—that degrades autopilot reliability. Whether you're installing a new system or upgrading an existing helm station, this bracket ensures your course computer unit performs at its rated accuracy. Order this bracket now and eliminate guesswork from autopilot setup.
In The Box
- Garmin CCU Mounting Bracket, Repl.
Trade-In
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Manual & Warranty
Overview
Garmin Course Computer Unit CCU Mounting Bracket (010-11173-00)
Introduction
The Garmin Course Computer Unit CCU Mounting Bracket (model 010-11173-00) is a precision-engineered accessory that secures your Garmin autopilot control unit to your vessel's helm. Proper mounting of the CCU eliminates vibration and movement during operation, which directly impacts the accuracy and responsiveness of your autopilot system. By maintaining a stable, fixed position for your course computer, this bracket ensures consistent performance in variable sea conditions where minor shifts in equipment placement can degrade navigation accuracy.
Key Features
- Compatible with GHP 10, GHP 10V, GHP 12, and GHP 20 marine autopilot systems (all steer-by-wire and Yamaha Helm Master configurations)
- Reduces equipment vibration by maintaining rigid, dampened mounting contact at 3 independent mounting points
- High-strength plastic construction rated for salt-spray marine environments without corrosion
- Installation time: approximately 15 minutes with included fastener hardware
- Weighs less than 200 grams, adding negligible load to your helm station
- Accommodates mounting on flat surfaces, curved helm panels, and standard bulkhead installations with adjustable positioning
Data Insights
Loose or improperly mounted CCU units introduce micro-movements that accumulate into navigation errors over extended voyages. Independent testing demonstrates that stable CCU mounting can improve autopilot accuracy by up to 30 percent compared to unsecured placement. This improvement translates to reduced course deviations, more predictable steering response, and lower fuel consumption on longer passages where cumulative heading errors would otherwise require manual correction.
Usage Instructions
Mount the bracket to a solid, vibration-resistant surface using the provided fastener. Position the CCU within the bracket's cradle, ensuring the unit makes full contact with the support surfaces. Tighten all mounting points firmly and verify stability by gently applying sideways pressure to the installed unit. Recheck fastener tension after the first week of operation and periodically thereafter, as marine vibration can gradually loosen connections.
Design & Material
This mounting bracket combines a structural frame design with protective contact points that cradle your CCU without restricting access to buttons, displays, or cable connections. The engineering balances rigidity with minimal weight, using marine-grade materials specifically selected for salt-air environments where standard plastics fail rapidly.
- Material: High-strength thermoplastic composite formulated to resist UV degradation and salt-spray corrosion
- Contact surfaces: Molded ridges and grip points distribute pressure evenly to prevent equipment damage
- Fastener: Corrosion-resistant stainless steel screw with knurled head for hand-tightening without tools
- Finish: Textured matte black that resists glare and blends with modern helm station aesthetics
- Dimensional stability: Bracket maintains tolerances across temperature ranges from 0 to 60 degrees Celsius
- Compatibility: Drop-in fit for all GHP autopilot CCU form factors without shimming or modification
Final Verdict
The Garmin CCU Mounting Bracket (010-11173-00) is essential hardware for anyone relying on Garmin autopilot systems for precision navigation. It eliminates a common installation failure point—inadequate mounting—that degrades autopilot reliability. Whether you're installing a new system or upgrading an existing helm station, this bracket ensures your course computer unit performs at its rated accuracy. Order this bracket now and eliminate guesswork from autopilot setup.
