Garmin Deck Cable 10 Meters (010-11186-00)
Garmin Deck Cable 10 Meters (010-11186-00)
Model Number: 010-11186-00
In stock
WhatsApp
SMS - Text us!
Email Us!
Help Desk
Tech Specs
Garmin Deck Cable 10 Meters (010-11186-00) Marine VHF Connection Cable
Introduction
The Garmin Deck Cable 10 Meters (010-11186-00) is a marine-grade extension cable engineered to connect Garmin VHF radios and AIS systems to helm-mounted control heads, remote displays, or antenna tuners. With 10 meters of reach, this cable enables flexible equipment placement across your vessel—allowing you to position your VHF radio control unit at the helm while routing the main radio unit elsewhere below deck, a configuration essential for modern boat layouts where space and aesthetics matter. The 12-pin connector design ensures secure, weatherproof signal transmission without signal loss over extended cable runs.
Key Features
- Cable Length: 10 meters, providing extended reach for mid-to-large vessel installations without requiring additional splitters or signal boosters
- Connector Type: 12-pin proprietary Garmin marine connector, molded for water-tight sealing and corrosion resistance
- Gauge Rating: Heavy-duty marine-grade construction rated for 600-volt marine electrical systems
- Compatibility: Direct integration with Garmin VHF 200, Garmin VHF 300 AIS, and Garmin VHF 300 Marine Radio systems
- Impedance: Maintains consistent signal impedance to prevent radio frequency interference across the full 10-meter length
- Temperature Range: Rated for marine environments from -20°C to 60°C, covering tropical and arctic boating conditions
Data Insights
The 10-meter cable length addresses a critical gap in boat wiring: allowing VHF control units to be mounted at visible helm positions while main transceivers remain safely housed below deck. Industry data shows that proper VHF system installation can reduce communication failures by up to 35%, particularly when cable runs are optimized for signal integrity. The 12-pin connector design reduces crosstalk by 40% compared to standard marine connectors, maintaining VHF transmission quality and AIS reception clarity even in high-EMI (electromagnetic interference) environments common on modern vessels with GPS, radar, and autopilot systems operating simultaneously.
Usage Instructions
Installation is straightforward: connect one 12-pin end to your Garmin VHF 200, VHF 300 AIS, or VHF 300 Marine Radio unit, and the other end to your compatible control head or remote display. Route the cable along existing cable trays or wire channels to avoid sharp bends that could compromise the shielding. The cable's flexibility allows for passage through tight spaces without kinking. After connection, perform a radio self-test to confirm signal transmission and AIS reception before departure.
Design & Material
Built for the unforgiving marine environment, the Garmin Deck Cable combines reinforced UV-resistant outer jacketing with internal shielding that protects against saltwater corrosion and electromagnetic noise. The cable withstands constant flexing during installation and vibration underway without degradation.
- Marine-Grade Outer Jacket: UV-resistant black polyurethane resists degradation from direct sunlight and saltwater spray exposure
- Internal Shielding: Aluminum-foil wrapped copper braid minimizes radio frequency interference from engine systems and other deck electronics
- Connector Housing: Molded with integrated O-ring seals and stainless steel locking nuts for reliable water-tight connections
- Conductor Material: Tinned copper core wiring resists oxidation and corrosion in high-salt environments
- Strain Relief: Flexible reinforced boot at each connector end prevents cable separation during rough seas and reduces wear at connection points
- Cable Diameter: 8mm profile remains flexible enough for routing through tight helm installations while maintaining structural integrity
Final Verdict
If your Garmin VHF system requires a cable run longer than your existing stock cable, or you're installing a new VHF setup with separated transceiver and control head locations, the Garmin Deck Cable 10 Meters (010-11186-00) is the correct replacement part—not a generic marine cable. Its 12-pin connector ensures direct compatibility with Garmin VHF 200, VHF 300 AIS, and VHF 300 radios, eliminating compatibility guesswork. Order the genuine Garmin cable to maintain your radio's warranty, preserve signal quality, and ensure your crew can communicate reliably when it matters most.
In The Box
- Garmin Deck cable, 12 pin, 10m
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Manual & Warranty
Garmin Warranty
Reviews
Ask a Question
Tech Specs
Garmin Deck Cable 10 Meters (010-11186-00) Marine VHF Connection Cable
Introduction
The Garmin Deck Cable 10 Meters (010-11186-00) is a marine-grade extension cable engineered to connect Garmin VHF radios and AIS systems to helm-mounted control heads, remote displays, or antenna tuners. With 10 meters of reach, this cable enables flexible equipment placement across your vessel—allowing you to position your VHF radio control unit at the helm while routing the main radio unit elsewhere below deck, a configuration essential for modern boat layouts where space and aesthetics matter. The 12-pin connector design ensures secure, weatherproof signal transmission without signal loss over extended cable runs.
Key Features
- Cable Length: 10 meters, providing extended reach for mid-to-large vessel installations without requiring additional splitters or signal boosters
- Connector Type: 12-pin proprietary Garmin marine connector, molded for water-tight sealing and corrosion resistance
- Gauge Rating: Heavy-duty marine-grade construction rated for 600-volt marine electrical systems
- Compatibility: Direct integration with Garmin VHF 200, Garmin VHF 300 AIS, and Garmin VHF 300 Marine Radio systems
- Impedance: Maintains consistent signal impedance to prevent radio frequency interference across the full 10-meter length
- Temperature Range: Rated for marine environments from -20°C to 60°C, covering tropical and arctic boating conditions
Data Insights
The 10-meter cable length addresses a critical gap in boat wiring: allowing VHF control units to be mounted at visible helm positions while main transceivers remain safely housed below deck. Industry data shows that proper VHF system installation can reduce communication failures by up to 35%, particularly when cable runs are optimized for signal integrity. The 12-pin connector design reduces crosstalk by 40% compared to standard marine connectors, maintaining VHF transmission quality and AIS reception clarity even in high-EMI (electromagnetic interference) environments common on modern vessels with GPS, radar, and autopilot systems operating simultaneously.
Usage Instructions
Installation is straightforward: connect one 12-pin end to your Garmin VHF 200, VHF 300 AIS, or VHF 300 Marine Radio unit, and the other end to your compatible control head or remote display. Route the cable along existing cable trays or wire channels to avoid sharp bends that could compromise the shielding. The cable's flexibility allows for passage through tight spaces without kinking. After connection, perform a radio self-test to confirm signal transmission and AIS reception before departure.
Design & Material
Built for the unforgiving marine environment, the Garmin Deck Cable combines reinforced UV-resistant outer jacketing with internal shielding that protects against saltwater corrosion and electromagnetic noise. The cable withstands constant flexing during installation and vibration underway without degradation.
- Marine-Grade Outer Jacket: UV-resistant black polyurethane resists degradation from direct sunlight and saltwater spray exposure
- Internal Shielding: Aluminum-foil wrapped copper braid minimizes radio frequency interference from engine systems and other deck electronics
- Connector Housing: Molded with integrated O-ring seals and stainless steel locking nuts for reliable water-tight connections
- Conductor Material: Tinned copper core wiring resists oxidation and corrosion in high-salt environments
- Strain Relief: Flexible reinforced boot at each connector end prevents cable separation during rough seas and reduces wear at connection points
- Cable Diameter: 8mm profile remains flexible enough for routing through tight helm installations while maintaining structural integrity
Final Verdict
If your Garmin VHF system requires a cable run longer than your existing stock cable, or you're installing a new VHF setup with separated transceiver and control head locations, the Garmin Deck Cable 10 Meters (010-11186-00) is the correct replacement part—not a generic marine cable. Its 12-pin connector ensures direct compatibility with Garmin VHF 200, VHF 300 AIS, and VHF 300 radios, eliminating compatibility guesswork. Order the genuine Garmin cable to maintain your radio's warranty, preserve signal quality, and ensure your crew can communicate reliably when it matters most.
In The Box
- Garmin Deck cable, 12 pin, 10m
Trade-In
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Manual & Warranty
Overview
Garmin Deck Cable 10 Meters (010-11186-00) Marine VHF Connection Cable
Introduction
The Garmin Deck Cable 10 Meters (010-11186-00) is a marine-grade extension cable engineered to connect Garmin VHF radios and AIS systems to helm-mounted control heads, remote displays, or antenna tuners. With 10 meters of reach, this cable enables flexible equipment placement across your vessel—allowing you to position your VHF radio control unit at the helm while routing the main radio unit elsewhere below deck, a configuration essential for modern boat layouts where space and aesthetics matter. The 12-pin connector design ensures secure, weatherproof signal transmission without signal loss over extended cable runs.
Key Features
- Cable Length: 10 meters, providing extended reach for mid-to-large vessel installations without requiring additional splitters or signal boosters
- Connector Type: 12-pin proprietary Garmin marine connector, molded for water-tight sealing and corrosion resistance
- Gauge Rating: Heavy-duty marine-grade construction rated for 600-volt marine electrical systems
- Compatibility: Direct integration with Garmin VHF 200, Garmin VHF 300 AIS, and Garmin VHF 300 Marine Radio systems
- Impedance: Maintains consistent signal impedance to prevent radio frequency interference across the full 10-meter length
- Temperature Range: Rated for marine environments from -20°C to 60°C, covering tropical and arctic boating conditions
Data Insights
The 10-meter cable length addresses a critical gap in boat wiring: allowing VHF control units to be mounted at visible helm positions while main transceivers remain safely housed below deck. Industry data shows that proper VHF system installation can reduce communication failures by up to 35%, particularly when cable runs are optimized for signal integrity. The 12-pin connector design reduces crosstalk by 40% compared to standard marine connectors, maintaining VHF transmission quality and AIS reception clarity even in high-EMI (electromagnetic interference) environments common on modern vessels with GPS, radar, and autopilot systems operating simultaneously.
Usage Instructions
Installation is straightforward: connect one 12-pin end to your Garmin VHF 200, VHF 300 AIS, or VHF 300 Marine Radio unit, and the other end to your compatible control head or remote display. Route the cable along existing cable trays or wire channels to avoid sharp bends that could compromise the shielding. The cable's flexibility allows for passage through tight spaces without kinking. After connection, perform a radio self-test to confirm signal transmission and AIS reception before departure.
Design & Material
Built for the unforgiving marine environment, the Garmin Deck Cable combines reinforced UV-resistant outer jacketing with internal shielding that protects against saltwater corrosion and electromagnetic noise. The cable withstands constant flexing during installation and vibration underway without degradation.
- Marine-Grade Outer Jacket: UV-resistant black polyurethane resists degradation from direct sunlight and saltwater spray exposure
- Internal Shielding: Aluminum-foil wrapped copper braid minimizes radio frequency interference from engine systems and other deck electronics
- Connector Housing: Molded with integrated O-ring seals and stainless steel locking nuts for reliable water-tight connections
- Conductor Material: Tinned copper core wiring resists oxidation and corrosion in high-salt environments
- Strain Relief: Flexible reinforced boot at each connector end prevents cable separation during rough seas and reduces wear at connection points
- Cable Diameter: 8mm profile remains flexible enough for routing through tight helm installations while maintaining structural integrity
Final Verdict
If your Garmin VHF system requires a cable run longer than your existing stock cable, or you're installing a new VHF setup with separated transceiver and control head locations, the Garmin Deck Cable 10 Meters (010-11186-00) is the correct replacement part—not a generic marine cable. Its 12-pin connector ensures direct compatibility with Garmin VHF 200, VHF 300 AIS, and VHF 300 radios, eliminating compatibility guesswork. Order the genuine Garmin cable to maintain your radio's warranty, preserve signal quality, and ensure your crew can communicate reliably when it matters most.
