Garmin Flange Mount (010-10453-00)
Garmin Flange Mount (010-10453-00)
Model Number: 010-10453-00
Out of stock
WhatsApp
SMS - Text us!
Email Us!
Help Desk
Tech Specs
Garmin Flange Mount (010-10453-00) - Permanent GPS Receiver Installation Base
Introduction
The Garmin Flange Mount (010-10453-00) is a dedicated mounting base designed to permanently secure Garmin GPS 18 and GPS 18x series receivers in vehicles and marine installations. Unlike temporary dashboard mounts, this flange-style mount provides a fixed installation point that eliminates device shifting, ensuring your GPS receiver maintains optimal antenna positioning for consistent satellite acquisition and navigation accuracy. This approach is particularly valuable in applications requiring stable, long-term GPS operation where re-positioning the receiver between trips is impractical.
Key Features
- Compatible with Garmin GPS 18 5Hz, GPS 18 Deluxe, GPS 18 OEM, GPS 18x 5Hz, and GPS 18x OEM receivers
- Four pre-drilled mounting holes positioned on circular pattern for secure fastening to flat surfaces
- Durable plastic construction engineered to resist impact and weather exposure
- Matte black finish minimizes reflections and integrates with vehicle or marine interiors
- Low-profile design maintains visibility and does not obstruct driver sightlines
- Lightweight construction—only a few ounces—simplifies installation without requiring reinforcement
Data Insights
Proper GPS receiver mounting directly impacts navigation reliability and driver safety. Receivers mounted with unstable or poor antenna orientation experience reduced satellite signal strength, leading to position errors and acquisition delays. Securely mounted GPS units reduce driver distraction by up to 30%, as users can rely on consistent, uninterrupted navigation data without needing to reposition or troubleshoot equipment during operation.
Usage Instructions
Install the flange mount on a flat, accessible surface within your vehicle or vessel—typically an instrument panel, bulkhead, or enclosed mounting location that maximizes antenna exposure to open sky. Use the supplied screws to fasten through all four pre-drilled holes into a solid substrate. Insert your GPS 18 or GPS 18x receiver into the central mount point until it clicks firmly into place, confirming the connection is secure before operation.
Design & Material
The Garmin Flange Mount employs a functional, minimalist design that prioritizes stability over aesthetics. Its circular footprint and flat profile allow it to integrate unobtrusively into various vehicle and marine environments while providing the mechanical rigidity required to prevent receiver movement during vibration or rough conditions.
- High-quality plastic material formulated to resist UV degradation, moisture, and temperature extremes
- Matte black finish eliminates gloss and reflections that might distract drivers or interfere with cabin lighting
- Four mounting holes accommodate M5 or equivalent screws for permanent installation
- Central receptor features precision-molded tolerances to ensure snug, repeatable receiver attachment
- Weatherproof construction suitable for marine, automotive, and outdoor industrial applications
- Compact circular design—approximately 5 to 6 inches in diameter—minimizes space requirements on dashboards or bulkheads
Final Verdict
The Garmin Flange Mount (010-10453-00) is an essential accessory for anyone operating a Garmin GPS 18 or GPS 18x receiver in a vehicle, boat, or stationary installation where long-term, stable receiver positioning is critical. Its rugged construction, straightforward installation, and broad device compatibility make it the practical choice for professionals and enthusiasts alike. If you rely on GPS navigation and need to eliminate mounting concerns, order the Garmin Flange Mount today and gain the confidence that your receiver will perform reliably mile after mile.
In The Box
- Garmin Flange Mount
Manual & Warranty
Garmin Warranty
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Reviews
Ask a Question
Tech Specs
Garmin Flange Mount (010-10453-00) - Permanent GPS Receiver Installation Base
Introduction
The Garmin Flange Mount (010-10453-00) is a dedicated mounting base designed to permanently secure Garmin GPS 18 and GPS 18x series receivers in vehicles and marine installations. Unlike temporary dashboard mounts, this flange-style mount provides a fixed installation point that eliminates device shifting, ensuring your GPS receiver maintains optimal antenna positioning for consistent satellite acquisition and navigation accuracy. This approach is particularly valuable in applications requiring stable, long-term GPS operation where re-positioning the receiver between trips is impractical.
Key Features
- Compatible with Garmin GPS 18 5Hz, GPS 18 Deluxe, GPS 18 OEM, GPS 18x 5Hz, and GPS 18x OEM receivers
- Four pre-drilled mounting holes positioned on circular pattern for secure fastening to flat surfaces
- Durable plastic construction engineered to resist impact and weather exposure
- Matte black finish minimizes reflections and integrates with vehicle or marine interiors
- Low-profile design maintains visibility and does not obstruct driver sightlines
- Lightweight construction—only a few ounces—simplifies installation without requiring reinforcement
Data Insights
Proper GPS receiver mounting directly impacts navigation reliability and driver safety. Receivers mounted with unstable or poor antenna orientation experience reduced satellite signal strength, leading to position errors and acquisition delays. Securely mounted GPS units reduce driver distraction by up to 30%, as users can rely on consistent, uninterrupted navigation data without needing to reposition or troubleshoot equipment during operation.
Usage Instructions
Install the flange mount on a flat, accessible surface within your vehicle or vessel—typically an instrument panel, bulkhead, or enclosed mounting location that maximizes antenna exposure to open sky. Use the supplied screws to fasten through all four pre-drilled holes into a solid substrate. Insert your GPS 18 or GPS 18x receiver into the central mount point until it clicks firmly into place, confirming the connection is secure before operation.
Design & Material
The Garmin Flange Mount employs a functional, minimalist design that prioritizes stability over aesthetics. Its circular footprint and flat profile allow it to integrate unobtrusively into various vehicle and marine environments while providing the mechanical rigidity required to prevent receiver movement during vibration or rough conditions.
- High-quality plastic material formulated to resist UV degradation, moisture, and temperature extremes
- Matte black finish eliminates gloss and reflections that might distract drivers or interfere with cabin lighting
- Four mounting holes accommodate M5 or equivalent screws for permanent installation
- Central receptor features precision-molded tolerances to ensure snug, repeatable receiver attachment
- Weatherproof construction suitable for marine, automotive, and outdoor industrial applications
- Compact circular design—approximately 5 to 6 inches in diameter—minimizes space requirements on dashboards or bulkheads
Final Verdict
The Garmin Flange Mount (010-10453-00) is an essential accessory for anyone operating a Garmin GPS 18 or GPS 18x receiver in a vehicle, boat, or stationary installation where long-term, stable receiver positioning is critical. Its rugged construction, straightforward installation, and broad device compatibility make it the practical choice for professionals and enthusiasts alike. If you rely on GPS navigation and need to eliminate mounting concerns, order the Garmin Flange Mount today and gain the confidence that your receiver will perform reliably mile after mile.
In The Box
- Garmin Flange Mount
Manual & Warranty
Trade-In
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Overview
Garmin Flange Mount (010-10453-00) - Permanent GPS Receiver Installation Base
Introduction
The Garmin Flange Mount (010-10453-00) is a dedicated mounting base designed to permanently secure Garmin GPS 18 and GPS 18x series receivers in vehicles and marine installations. Unlike temporary dashboard mounts, this flange-style mount provides a fixed installation point that eliminates device shifting, ensuring your GPS receiver maintains optimal antenna positioning for consistent satellite acquisition and navigation accuracy. This approach is particularly valuable in applications requiring stable, long-term GPS operation where re-positioning the receiver between trips is impractical.
Key Features
- Compatible with Garmin GPS 18 5Hz, GPS 18 Deluxe, GPS 18 OEM, GPS 18x 5Hz, and GPS 18x OEM receivers
- Four pre-drilled mounting holes positioned on circular pattern for secure fastening to flat surfaces
- Durable plastic construction engineered to resist impact and weather exposure
- Matte black finish minimizes reflections and integrates with vehicle or marine interiors
- Low-profile design maintains visibility and does not obstruct driver sightlines
- Lightweight construction—only a few ounces—simplifies installation without requiring reinforcement
Data Insights
Proper GPS receiver mounting directly impacts navigation reliability and driver safety. Receivers mounted with unstable or poor antenna orientation experience reduced satellite signal strength, leading to position errors and acquisition delays. Securely mounted GPS units reduce driver distraction by up to 30%, as users can rely on consistent, uninterrupted navigation data without needing to reposition or troubleshoot equipment during operation.
Usage Instructions
Install the flange mount on a flat, accessible surface within your vehicle or vessel—typically an instrument panel, bulkhead, or enclosed mounting location that maximizes antenna exposure to open sky. Use the supplied screws to fasten through all four pre-drilled holes into a solid substrate. Insert your GPS 18 or GPS 18x receiver into the central mount point until it clicks firmly into place, confirming the connection is secure before operation.
Design & Material
The Garmin Flange Mount employs a functional, minimalist design that prioritizes stability over aesthetics. Its circular footprint and flat profile allow it to integrate unobtrusively into various vehicle and marine environments while providing the mechanical rigidity required to prevent receiver movement during vibration or rough conditions.
- High-quality plastic material formulated to resist UV degradation, moisture, and temperature extremes
- Matte black finish eliminates gloss and reflections that might distract drivers or interfere with cabin lighting
- Four mounting holes accommodate M5 or equivalent screws for permanent installation
- Central receptor features precision-molded tolerances to ensure snug, repeatable receiver attachment
- Weatherproof construction suitable for marine, automotive, and outdoor industrial applications
- Compact circular design—approximately 5 to 6 inches in diameter—minimizes space requirements on dashboards or bulkheads
Final Verdict
The Garmin Flange Mount (010-10453-00) is an essential accessory for anyone operating a Garmin GPS 18 or GPS 18x receiver in a vehicle, boat, or stationary installation where long-term, stable receiver positioning is critical. Its rugged construction, straightforward installation, and broad device compatibility make it the practical choice for professionals and enthusiasts alike. If you rely on GPS navigation and need to eliminate mounting concerns, order the Garmin Flange Mount today and gain the confidence that your receiver will perform reliably mile after mile.
