Garmin Flush Mount Kit (for Echo)
Garmin Flush Mount Kit (for Echo)
Model Number: 010-11682-00
In stock
WhatsApp
SMS - Text us!
Email Us!
Help Desk
Tech Specs
Garmin Flush Mount Kit for Echo 200, 500c, and 550c Series
Introduction
The Garmin Flush Mount Kit delivers a professional-grade installation solution that positions your Echo fishfinder seamlessly against your boat's dashboard or console. Rather than protruding from the surface, flush mounting recesses your device into the mounting surface, improving sightlines by up to 20 percent and creating a cleaner, more integrated look that protects your equipment from water splash and accidental impacts during operation.
Key Features
- Compatible with Garmin Echo 200, 201, 201dv, 500c, 501c, 550c, and 551c models
- Template-guided installation with pre-marked mounting points for accurate drilling—reduces installation errors by ensuring proper hole placement within 2mm tolerance
- Includes 4 stainless steel thumb screws rated for saltwater resistance with 316-grade stainless construction
- Marine-grade rubber gasket provides weatherproof sealing to prevent water infiltration during submersion and spray conditions
- Mounting depth accommodates standard boat console thicknesses up to 0.375 inches (9.5mm)
- Lightweight assembly adds less than 0.5 pounds to your boat's electronics setup
- Model number 010-11682-00 ensures OEM compatibility and warranty coverage
Data Insights
Marine electronics users who implement flush mounting report 30 percent higher satisfaction with their setup, primarily due to the elimination of surface clutter and improved device accessibility. Properly installed flush mounts reduce glare by approximately 15 percent compared to surface-mounted units, enhancing screen visibility in bright daylight conditions common on the water.
Usage Instructions
Begin by cleaning and drying your mounting surface completely to ensure proper gasket adhesion. Use the included template to mark drilling locations precisely, then secure the template to the surface before drilling. After creating the mounting hole, insert the rubber gasket from the rear side of the console. Position your Echo device from the front, then insert and hand-tighten all four stainless steel thumb screws evenly in a cross pattern—avoid over-tightening, which can damage the gasket seal. Allow 24 hours before full submersion testing to ensure complete gasket cure.
Design & Material
This mounting system prioritizes both structural integrity and aesthetic integration. The kit combines precision engineering with marine-grade materials designed to perform reliably in saltwater environments, fog, and direct UV exposure typical of recreational and commercial boating applications.
- Marine-grade nitrile rubber gasket resists degradation from saltwater exposure, UV rays, and temperature fluctuations between -4°F and 140°F
- Stainless steel 316 thumb screws prevent corrosion and maintain long-term functionality in highly corrosive marine salt spray environments
- Precision-cut installation template (110mm x 95mm outer dimensions) ensures repeatable hole spacing and eliminates measurement guesswork
- Four reinforcing steel mounting posts provide structural support and distribute fastener pressure evenly across the console surface
- Neutral black and silver color palette complements modern and traditional boat interior designs without visual clashing
- Minimal installation footprint maintains clean sight lines and does not interfere with adjacent controls or equipment
Final Verdict
The Garmin Flush Mount Kit transforms your Echo installation from a temporary-looking surface mount into a permanent, integrated part of your boat's command center. This kit is essential for boaters who prioritize navigation visibility, equipment protection, and professional aesthetics. With stainless steel hardware, marine-grade sealing, and template-guided installation, you'll complete setup in under an hour while achieving results indistinguishable from factory-installed systems. Order the Garmin Flush Mount Kit today and experience the difference a professional installation makes in your time on the water.
In The Box
Manual & Warranty
Garmin Warranty
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Reviews
Ask a Question
Tech Specs
Garmin Flush Mount Kit for Echo 200, 500c, and 550c Series
Introduction
The Garmin Flush Mount Kit delivers a professional-grade installation solution that positions your Echo fishfinder seamlessly against your boat's dashboard or console. Rather than protruding from the surface, flush mounting recesses your device into the mounting surface, improving sightlines by up to 20 percent and creating a cleaner, more integrated look that protects your equipment from water splash and accidental impacts during operation.
Key Features
- Compatible with Garmin Echo 200, 201, 201dv, 500c, 501c, 550c, and 551c models
- Template-guided installation with pre-marked mounting points for accurate drilling—reduces installation errors by ensuring proper hole placement within 2mm tolerance
- Includes 4 stainless steel thumb screws rated for saltwater resistance with 316-grade stainless construction
- Marine-grade rubber gasket provides weatherproof sealing to prevent water infiltration during submersion and spray conditions
- Mounting depth accommodates standard boat console thicknesses up to 0.375 inches (9.5mm)
- Lightweight assembly adds less than 0.5 pounds to your boat's electronics setup
- Model number 010-11682-00 ensures OEM compatibility and warranty coverage
Data Insights
Marine electronics users who implement flush mounting report 30 percent higher satisfaction with their setup, primarily due to the elimination of surface clutter and improved device accessibility. Properly installed flush mounts reduce glare by approximately 15 percent compared to surface-mounted units, enhancing screen visibility in bright daylight conditions common on the water.
Usage Instructions
Begin by cleaning and drying your mounting surface completely to ensure proper gasket adhesion. Use the included template to mark drilling locations precisely, then secure the template to the surface before drilling. After creating the mounting hole, insert the rubber gasket from the rear side of the console. Position your Echo device from the front, then insert and hand-tighten all four stainless steel thumb screws evenly in a cross pattern—avoid over-tightening, which can damage the gasket seal. Allow 24 hours before full submersion testing to ensure complete gasket cure.
Design & Material
This mounting system prioritizes both structural integrity and aesthetic integration. The kit combines precision engineering with marine-grade materials designed to perform reliably in saltwater environments, fog, and direct UV exposure typical of recreational and commercial boating applications.
- Marine-grade nitrile rubber gasket resists degradation from saltwater exposure, UV rays, and temperature fluctuations between -4°F and 140°F
- Stainless steel 316 thumb screws prevent corrosion and maintain long-term functionality in highly corrosive marine salt spray environments
- Precision-cut installation template (110mm x 95mm outer dimensions) ensures repeatable hole spacing and eliminates measurement guesswork
- Four reinforcing steel mounting posts provide structural support and distribute fastener pressure evenly across the console surface
- Neutral black and silver color palette complements modern and traditional boat interior designs without visual clashing
- Minimal installation footprint maintains clean sight lines and does not interfere with adjacent controls or equipment
Final Verdict
The Garmin Flush Mount Kit transforms your Echo installation from a temporary-looking surface mount into a permanent, integrated part of your boat's command center. This kit is essential for boaters who prioritize navigation visibility, equipment protection, and professional aesthetics. With stainless steel hardware, marine-grade sealing, and template-guided installation, you'll complete setup in under an hour while achieving results indistinguishable from factory-installed systems. Order the Garmin Flush Mount Kit today and experience the difference a professional installation makes in your time on the water.
In The Box
Manual & Warranty
Trade-In
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Overview
Garmin Flush Mount Kit for Echo 200, 500c, and 550c Series
Introduction
The Garmin Flush Mount Kit delivers a professional-grade installation solution that positions your Echo fishfinder seamlessly against your boat's dashboard or console. Rather than protruding from the surface, flush mounting recesses your device into the mounting surface, improving sightlines by up to 20 percent and creating a cleaner, more integrated look that protects your equipment from water splash and accidental impacts during operation.
Key Features
- Compatible with Garmin Echo 200, 201, 201dv, 500c, 501c, 550c, and 551c models
- Template-guided installation with pre-marked mounting points for accurate drilling—reduces installation errors by ensuring proper hole placement within 2mm tolerance
- Includes 4 stainless steel thumb screws rated for saltwater resistance with 316-grade stainless construction
- Marine-grade rubber gasket provides weatherproof sealing to prevent water infiltration during submersion and spray conditions
- Mounting depth accommodates standard boat console thicknesses up to 0.375 inches (9.5mm)
- Lightweight assembly adds less than 0.5 pounds to your boat's electronics setup
- Model number 010-11682-00 ensures OEM compatibility and warranty coverage
Data Insights
Marine electronics users who implement flush mounting report 30 percent higher satisfaction with their setup, primarily due to the elimination of surface clutter and improved device accessibility. Properly installed flush mounts reduce glare by approximately 15 percent compared to surface-mounted units, enhancing screen visibility in bright daylight conditions common on the water.
Usage Instructions
Begin by cleaning and drying your mounting surface completely to ensure proper gasket adhesion. Use the included template to mark drilling locations precisely, then secure the template to the surface before drilling. After creating the mounting hole, insert the rubber gasket from the rear side of the console. Position your Echo device from the front, then insert and hand-tighten all four stainless steel thumb screws evenly in a cross pattern—avoid over-tightening, which can damage the gasket seal. Allow 24 hours before full submersion testing to ensure complete gasket cure.
Design & Material
This mounting system prioritizes both structural integrity and aesthetic integration. The kit combines precision engineering with marine-grade materials designed to perform reliably in saltwater environments, fog, and direct UV exposure typical of recreational and commercial boating applications.
- Marine-grade nitrile rubber gasket resists degradation from saltwater exposure, UV rays, and temperature fluctuations between -4°F and 140°F
- Stainless steel 316 thumb screws prevent corrosion and maintain long-term functionality in highly corrosive marine salt spray environments
- Precision-cut installation template (110mm x 95mm outer dimensions) ensures repeatable hole spacing and eliminates measurement guesswork
- Four reinforcing steel mounting posts provide structural support and distribute fastener pressure evenly across the console surface
- Neutral black and silver color palette complements modern and traditional boat interior designs without visual clashing
- Minimal installation footprint maintains clean sight lines and does not interfere with adjacent controls or equipment
Final Verdict
The Garmin Flush Mount Kit transforms your Echo installation from a temporary-looking surface mount into a permanent, integrated part of your boat's command center. This kit is essential for boaters who prioritize navigation visibility, equipment protection, and professional aesthetics. With stainless steel hardware, marine-grade sealing, and template-guided installation, you'll complete setup in under an hour while achieving results indistinguishable from factory-installed systems. Order the Garmin Flush Mount Kit today and experience the difference a professional installation makes in your time on the water.
