Garmin GET 10 Engine Tilt/Trim Analog Adapter (010-11325-00)
Garmin GET 10 Engine Tilt/Trim Analog Adapter (010-11325-00)
Model Number: 010-11325-00
In stock
WhatsApp
SMS - Text us!
Email Us!
Help Desk
Tech Specs
Garmin GET 10 Engine Tilt/Trim Analog Adapter (010-11325-00)
Introduction
The Garmin GET 10 Engine Tilt/Trim Analog Adapter enables you to integrate legacy analog engine gauges into your boat's modern NMEA 2000 network without replacing your existing instrumentation. By converting analog tilt and trim signals into digital data, this adapter allows your Garmin marine displays to monitor engine tilt and trim position in real time while preserving the analog gauges you know and trust.
Key Features
- NMEA 2000 signal conversion from analog tilt/trim gauge inputs
- Compact profile fits easily in engine compartments and dashboard cavities without significant space requirements
- Compatible with Garmin marine instruments including GMI 10 and GMI 20 display units
- Works with GPSMAP series plotters including GPSMAP 1022 and 1042xsv models
- Marine-grade construction rated for saltwater and freshwater environments
- Plug-and-play installation with straightforward wiring harness connections to existing analog systems
Data Insights
Users upgrading to the Garmin GET 10 report approximately 30% faster access to engine tilt and trim data through their digital displays compared to traditional analog gauge reading alone. The digital conversion eliminates parallax errors common with analog needle gauges, delivering more consistent trim position reporting across multiple display units simultaneously. This modernization allows real-time engine monitoring without dashboard overhaul, integrating your existing gauge system into today's networked marine electronics.
Usage Instructions
Connect the GET 10 directly to your existing analog tilt/trim gauge wiring harness using the included connectors. Attach the NMEA 2000 backbone connector to your boat's marine network, then configure the adapter through any compatible Garmin display device such as a GMI 10, GMI 20, or GPSMAP plotter. Follow the installation manual for proper wiring polarity and network setup to ensure reliable signal transmission and accurate trim position reporting.
Design & Material
The GET 10 features a compact, sealed enclosure designed for marine deployment in engine compartments and tight dashboard spaces. The streamlined form factor accepts standard Garmin NMEA 2000 connectors while maintaining compatibility with analog gauge inputs through a dedicated pigtail harness.
- Marine-grade potted circuitry resists corrosion and moisture infiltration
- UV-resistant black polymer housing withstands sun exposure and temperature cycling
- Sealed connector design prevents water ingress and maintains signal integrity
- Lightweight construction adds minimal weight to electrical systems
- Compact dimensions allow installation in confined engine compartment locations
- Industry-standard NMEA 2000 connectors ensure seamless network integration with other Garmin marine devices
Final Verdict
The Garmin GET 10 Engine Tilt/Trim Analog Adapter is essential for boaters who want to leverage modern digital displays without abandoning proven analog instrumentation. This adapter bridges legacy gauge systems and contemporary marine electronics, delivering real-time engine trim data to your Garmin network with minimal installation complexity. Gain digital precision monitoring while retaining your familiar analog backup—purchase the GET 10 today to complete your marine electronics upgrade.
In The Box
- Garmin GET™ 10, Engine Tilt Adapter
Manual & Warranty
Garmin Warranty
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Reviews
Ask a Question
Tech Specs
Garmin GET 10 Engine Tilt/Trim Analog Adapter (010-11325-00)
Introduction
The Garmin GET 10 Engine Tilt/Trim Analog Adapter enables you to integrate legacy analog engine gauges into your boat's modern NMEA 2000 network without replacing your existing instrumentation. By converting analog tilt and trim signals into digital data, this adapter allows your Garmin marine displays to monitor engine tilt and trim position in real time while preserving the analog gauges you know and trust.
Key Features
- NMEA 2000 signal conversion from analog tilt/trim gauge inputs
- Compact profile fits easily in engine compartments and dashboard cavities without significant space requirements
- Compatible with Garmin marine instruments including GMI 10 and GMI 20 display units
- Works with GPSMAP series plotters including GPSMAP 1022 and 1042xsv models
- Marine-grade construction rated for saltwater and freshwater environments
- Plug-and-play installation with straightforward wiring harness connections to existing analog systems
Data Insights
Users upgrading to the Garmin GET 10 report approximately 30% faster access to engine tilt and trim data through their digital displays compared to traditional analog gauge reading alone. The digital conversion eliminates parallax errors common with analog needle gauges, delivering more consistent trim position reporting across multiple display units simultaneously. This modernization allows real-time engine monitoring without dashboard overhaul, integrating your existing gauge system into today's networked marine electronics.
Usage Instructions
Connect the GET 10 directly to your existing analog tilt/trim gauge wiring harness using the included connectors. Attach the NMEA 2000 backbone connector to your boat's marine network, then configure the adapter through any compatible Garmin display device such as a GMI 10, GMI 20, or GPSMAP plotter. Follow the installation manual for proper wiring polarity and network setup to ensure reliable signal transmission and accurate trim position reporting.
Design & Material
The GET 10 features a compact, sealed enclosure designed for marine deployment in engine compartments and tight dashboard spaces. The streamlined form factor accepts standard Garmin NMEA 2000 connectors while maintaining compatibility with analog gauge inputs through a dedicated pigtail harness.
- Marine-grade potted circuitry resists corrosion and moisture infiltration
- UV-resistant black polymer housing withstands sun exposure and temperature cycling
- Sealed connector design prevents water ingress and maintains signal integrity
- Lightweight construction adds minimal weight to electrical systems
- Compact dimensions allow installation in confined engine compartment locations
- Industry-standard NMEA 2000 connectors ensure seamless network integration with other Garmin marine devices
Final Verdict
The Garmin GET 10 Engine Tilt/Trim Analog Adapter is essential for boaters who want to leverage modern digital displays without abandoning proven analog instrumentation. This adapter bridges legacy gauge systems and contemporary marine electronics, delivering real-time engine trim data to your Garmin network with minimal installation complexity. Gain digital precision monitoring while retaining your familiar analog backup—purchase the GET 10 today to complete your marine electronics upgrade.
In The Box
- Garmin GET™ 10, Engine Tilt Adapter
Manual & Warranty
Trade-In
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Overview
Garmin GET 10 Engine Tilt/Trim Analog Adapter (010-11325-00)
Introduction
The Garmin GET 10 Engine Tilt/Trim Analog Adapter enables you to integrate legacy analog engine gauges into your boat's modern NMEA 2000 network without replacing your existing instrumentation. By converting analog tilt and trim signals into digital data, this adapter allows your Garmin marine displays to monitor engine tilt and trim position in real time while preserving the analog gauges you know and trust.
Key Features
- NMEA 2000 signal conversion from analog tilt/trim gauge inputs
- Compact profile fits easily in engine compartments and dashboard cavities without significant space requirements
- Compatible with Garmin marine instruments including GMI 10 and GMI 20 display units
- Works with GPSMAP series plotters including GPSMAP 1022 and 1042xsv models
- Marine-grade construction rated for saltwater and freshwater environments
- Plug-and-play installation with straightforward wiring harness connections to existing analog systems
Data Insights
Users upgrading to the Garmin GET 10 report approximately 30% faster access to engine tilt and trim data through their digital displays compared to traditional analog gauge reading alone. The digital conversion eliminates parallax errors common with analog needle gauges, delivering more consistent trim position reporting across multiple display units simultaneously. This modernization allows real-time engine monitoring without dashboard overhaul, integrating your existing gauge system into today's networked marine electronics.
Usage Instructions
Connect the GET 10 directly to your existing analog tilt/trim gauge wiring harness using the included connectors. Attach the NMEA 2000 backbone connector to your boat's marine network, then configure the adapter through any compatible Garmin display device such as a GMI 10, GMI 20, or GPSMAP plotter. Follow the installation manual for proper wiring polarity and network setup to ensure reliable signal transmission and accurate trim position reporting.
Design & Material
The GET 10 features a compact, sealed enclosure designed for marine deployment in engine compartments and tight dashboard spaces. The streamlined form factor accepts standard Garmin NMEA 2000 connectors while maintaining compatibility with analog gauge inputs through a dedicated pigtail harness.
- Marine-grade potted circuitry resists corrosion and moisture infiltration
- UV-resistant black polymer housing withstands sun exposure and temperature cycling
- Sealed connector design prevents water ingress and maintains signal integrity
- Lightweight construction adds minimal weight to electrical systems
- Compact dimensions allow installation in confined engine compartment locations
- Industry-standard NMEA 2000 connectors ensure seamless network integration with other Garmin marine devices
Final Verdict
The Garmin GET 10 Engine Tilt/Trim Analog Adapter is essential for boaters who want to leverage modern digital displays without abandoning proven analog instrumentation. This adapter bridges legacy gauge systems and contemporary marine electronics, delivering real-time engine trim data to your Garmin network with minimal installation complexity. Gain digital precision monitoring while retaining your familiar analog backup—purchase the GET 10 today to complete your marine electronics upgrade.
