Garmin GMS 10 Network Port Expander (010-00351-00)
Garmin GMS 10 Network Port Expander (010-00351-00)
Model Number: 010-00351-00
In stock
WhatsApp
SMS - Text us!
Email Us!
Help Desk
Tech Specs
Garmin GMS 10 Network Port Expander (010-00351-00)
Introduction
The Garmin GMS 10 Network Port Expander extends your Garmin Marine Network by adding multiple data ports to a single network backbone, eliminating the need to run separate cables from a central hub. This device solves the common marine networking challenge of limited port availability when integrating multiple displays, chartplotters, or peripheral instruments on your vessel. By consolidating connections through a single standard Garmin data cable, the GMS 10 reduces installation complexity and improves overall system organization in confined onboard spaces.
Key Features
- Four dedicated network ports plus one upstream connection port for daisy-chain expansion capability
- Data transfer rates up to 10 Mbps supporting real-time display updates across multiple devices
- Completely waterproof connectors rated for marine environment exposure
- Compact housing measures 10.3 x 4.5 x 2.5 inches, fitting easily behind console mounting areas
- Plug-and-play compatibility with Garmin GPSMAP and integrated marine navigation systems
- Automatic peripheral detection reduces setup time by approximately 30% compared to manual configuration methods
Data Insights
The GMS 10 addresses a critical bottleneck in marine electronics integration. Network latency decreases by up to 30% when distributing connections through the expander rather than running multiple independent cables through a central unit. Users who manage four or more networked instruments report measurably more stable data transmission and faster response times when executing chart updates, autopilot commands, and sensor data refreshes simultaneously.
Usage Instructions
Connect the GMS 10 upstream port to your primary Garmin network backbone using the supplied standard data cable. Attach your additional devices to any of the four available ports using identical Garmin network cables. The unit automatically detects all connected peripherals without requiring manual address assignment. Install the expander in a protected location with minimal moisture exposure, and verify all connector caps are seated firmly on unused ports.
Design & Material
The GMS 10 features a horizontal, dock-like form factor designed to mount horizontally beneath consoles or vertical installation on instrument panels. The durable construction withstands salt spray, thermal cycling, and mechanical vibration inherent to marine environments. Black powder-coated casing blends seamlessly with standard marine electronics while providing surface durability against UV exposure and abrasion.
- Marine-grade aluminum and reinforced polymer housing resistant to corrosion
- Sealed rubber gaskets on all unused ports prevent moisture infiltration and salt crystallization
- Molded cable strain relief connectors rated for 500+ insertion cycles
- Integrated cable management clips anchor two data lines without external hardware
- Anodized aluminum top plate resists oxidation in high-humidity and saltwater conditions
- Recessed mounting lugs accommodate both horizontal and vertical installation orientations
Final Verdict
If your vessel runs multiple Garmin networked instruments, the GMS 10 eliminates the architectural limitation of hub-based systems and centralizes your network distribution. The waterproof construction, compact footprint, and automatic device detection make it particularly valuable for retrofit installations where cable routing through existing conduit is impractical. Serious cruisers and fishing vessel operators requiring four or more connected displays will recognize this as essential infrastructure, not optional accessory. Streamline your marine network now—add the GMS 10 to your electronics integration plan.
In The Box
What's in the Box:
- GMS 10
- Mounting hardware
- RJ-45 cable
- Power/data cable
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Manual & Warranty
Garmin Warranty
Reviews
Ask a Question
Tech Specs
Garmin GMS 10 Network Port Expander (010-00351-00)
Introduction
The Garmin GMS 10 Network Port Expander extends your Garmin Marine Network by adding multiple data ports to a single network backbone, eliminating the need to run separate cables from a central hub. This device solves the common marine networking challenge of limited port availability when integrating multiple displays, chartplotters, or peripheral instruments on your vessel. By consolidating connections through a single standard Garmin data cable, the GMS 10 reduces installation complexity and improves overall system organization in confined onboard spaces.
Key Features
- Four dedicated network ports plus one upstream connection port for daisy-chain expansion capability
- Data transfer rates up to 10 Mbps supporting real-time display updates across multiple devices
- Completely waterproof connectors rated for marine environment exposure
- Compact housing measures 10.3 x 4.5 x 2.5 inches, fitting easily behind console mounting areas
- Plug-and-play compatibility with Garmin GPSMAP and integrated marine navigation systems
- Automatic peripheral detection reduces setup time by approximately 30% compared to manual configuration methods
Data Insights
The GMS 10 addresses a critical bottleneck in marine electronics integration. Network latency decreases by up to 30% when distributing connections through the expander rather than running multiple independent cables through a central unit. Users who manage four or more networked instruments report measurably more stable data transmission and faster response times when executing chart updates, autopilot commands, and sensor data refreshes simultaneously.
Usage Instructions
Connect the GMS 10 upstream port to your primary Garmin network backbone using the supplied standard data cable. Attach your additional devices to any of the four available ports using identical Garmin network cables. The unit automatically detects all connected peripherals without requiring manual address assignment. Install the expander in a protected location with minimal moisture exposure, and verify all connector caps are seated firmly on unused ports.
Design & Material
The GMS 10 features a horizontal, dock-like form factor designed to mount horizontally beneath consoles or vertical installation on instrument panels. The durable construction withstands salt spray, thermal cycling, and mechanical vibration inherent to marine environments. Black powder-coated casing blends seamlessly with standard marine electronics while providing surface durability against UV exposure and abrasion.
- Marine-grade aluminum and reinforced polymer housing resistant to corrosion
- Sealed rubber gaskets on all unused ports prevent moisture infiltration and salt crystallization
- Molded cable strain relief connectors rated for 500+ insertion cycles
- Integrated cable management clips anchor two data lines without external hardware
- Anodized aluminum top plate resists oxidation in high-humidity and saltwater conditions
- Recessed mounting lugs accommodate both horizontal and vertical installation orientations
Final Verdict
If your vessel runs multiple Garmin networked instruments, the GMS 10 eliminates the architectural limitation of hub-based systems and centralizes your network distribution. The waterproof construction, compact footprint, and automatic device detection make it particularly valuable for retrofit installations where cable routing through existing conduit is impractical. Serious cruisers and fishing vessel operators requiring four or more connected displays will recognize this as essential infrastructure, not optional accessory. Streamline your marine network now—add the GMS 10 to your electronics integration plan.
In The Box
What's in the Box:
- GMS 10
- Mounting hardware
- RJ-45 cable
- Power/data cable
Trade-In
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Manual & Warranty
Overview
Garmin GMS 10 Network Port Expander (010-00351-00)
Introduction
The Garmin GMS 10 Network Port Expander extends your Garmin Marine Network by adding multiple data ports to a single network backbone, eliminating the need to run separate cables from a central hub. This device solves the common marine networking challenge of limited port availability when integrating multiple displays, chartplotters, or peripheral instruments on your vessel. By consolidating connections through a single standard Garmin data cable, the GMS 10 reduces installation complexity and improves overall system organization in confined onboard spaces.
Key Features
- Four dedicated network ports plus one upstream connection port for daisy-chain expansion capability
- Data transfer rates up to 10 Mbps supporting real-time display updates across multiple devices
- Completely waterproof connectors rated for marine environment exposure
- Compact housing measures 10.3 x 4.5 x 2.5 inches, fitting easily behind console mounting areas
- Plug-and-play compatibility with Garmin GPSMAP and integrated marine navigation systems
- Automatic peripheral detection reduces setup time by approximately 30% compared to manual configuration methods
Data Insights
The GMS 10 addresses a critical bottleneck in marine electronics integration. Network latency decreases by up to 30% when distributing connections through the expander rather than running multiple independent cables through a central unit. Users who manage four or more networked instruments report measurably more stable data transmission and faster response times when executing chart updates, autopilot commands, and sensor data refreshes simultaneously.
Usage Instructions
Connect the GMS 10 upstream port to your primary Garmin network backbone using the supplied standard data cable. Attach your additional devices to any of the four available ports using identical Garmin network cables. The unit automatically detects all connected peripherals without requiring manual address assignment. Install the expander in a protected location with minimal moisture exposure, and verify all connector caps are seated firmly on unused ports.
Design & Material
The GMS 10 features a horizontal, dock-like form factor designed to mount horizontally beneath consoles or vertical installation on instrument panels. The durable construction withstands salt spray, thermal cycling, and mechanical vibration inherent to marine environments. Black powder-coated casing blends seamlessly with standard marine electronics while providing surface durability against UV exposure and abrasion.
- Marine-grade aluminum and reinforced polymer housing resistant to corrosion
- Sealed rubber gaskets on all unused ports prevent moisture infiltration and salt crystallization
- Molded cable strain relief connectors rated for 500+ insertion cycles
- Integrated cable management clips anchor two data lines without external hardware
- Anodized aluminum top plate resists oxidation in high-humidity and saltwater conditions
- Recessed mounting lugs accommodate both horizontal and vertical installation orientations
Final Verdict
If your vessel runs multiple Garmin networked instruments, the GMS 10 eliminates the architectural limitation of hub-based systems and centralizes your network distribution. The waterproof construction, compact footprint, and automatic device detection make it particularly valuable for retrofit installations where cable routing through existing conduit is impractical. Serious cruisers and fishing vessel operators requiring four or more connected displays will recognize this as essential infrastructure, not optional accessory. Streamline your marine network now—add the GMS 10 to your electronics integration plan.
