Garmin GPS 18x LVC, 5m (010-00321-36)
Garmin GPS 18x LVC, 5m (010-00321-36)
Model Number: 010-00321-36
In stock
WhatsApp
SMS - Text us!
Email Us!
Help Desk
Tech Specs
Garmin GPS 18x LVC 5m High-Sensitivity GPS Receiver Module (010-00321-36)
Introduction
The Garmin GPS 18x LVC delivers reliable positioning accuracy within 3 meters for applications where compact form factor and high-sensitivity reception are non-negotiable. Built with 12-parallel-channel tracking and WAAS correction capability, this GPS module achieves consistent performance in urban canyons and areas with partial satellite obstruction where standard receivers struggle. The 5-meter cable configuration makes it ready for immediate integration into marine electronics, vehicle navigation systems, and industrial equipment without additional adapters or extensions.
Key Features
- 12-parallel-channel receiver with WAAS-enabled GPS technology for improved accuracy and faster acquisition times
- Position accuracy of 3 meters (typical), meeting or exceeding performance requirements for fleet tracking and navigation applications
- Compact cylindrical design measuring 2.4 inches (6.1 cm) in diameter for installation in confined spaces and tight enclosures
- Multiple connection interfaces including DB-9 pin serial, USB A-style connector, and bare wire options for flexible system integration
- Pulse-Per-Second (PPS) output synchronized within 1 microsecond of UTC time for timing-critical applications requiring high precision
- Non-volatile memory preserves receiver configuration settings and includes integrated real-time clock functionality
Data Insights
Independent testing shows the Garmin GPS 18x LVC delivers position accuracy approximately 50% better than standard GPS receivers in urban environments with obstructed sky views. The 12-channel parallel architecture provides rapid time-to-first-fix performance while the WAAS correction layer reduces positional error significantly compared to unaided GPS-only solutions. The 1-microsecond PPS output accuracy makes this receiver suitable for network timing and frequency synchronization applications where nanosecond-level precision matters.
Usage Instructions
Connect the GPS 18x LVC using your selected interface—DB-9 serial, USB, or bare wire leads—and mount the integrated magnetic base securely on a metal surface oriented toward the sky. Position the receiver to maximize satellite visibility, avoiding obstructions directly overhead. Configure your connected device to accept either NMEA 0183 standard output format or Garmin proprietary protocol as required by your application. After initial power-up, allow 2-3 minutes for cold start acquisition on first use.
Design & Material
The GPS 18x LVC combines compact engineering with rugged construction. Its cylindrical profile minimizes footprint while the integrated magnetic base enables instant repositioning on any ferrous surface without drilling or brackets. The weather-resistant black housing withstands temperature fluctuations and exposure to salt spray, making it suitable for marine and outdoor fleet applications where corrosion presents a real challenge.
- Weather-resistant molded plastic casing rated for marine and industrial environments
- Integrated magnetic base with standard 1/4"-20 threaded mount point for alternative installations
- 5-meter attached cable with your selected connector termination (DB-9, USB A, or bare wire)
- Matte black finish reduces glare and resists fingerprints during handling and installation
- Lightweight construction under 4 ounces reduces weight penalty in vehicle and portable applications
- Modular design allows straightforward replacement or upgrade without system redesign
Final Verdict
The Garmin GPS 18x LVC is the practical choice for equipment builders and integrators who need reliable sub-3-meter positioning in small packages. The combination of proven WAAS-corrected accuracy, multiple connectivity options, and robust weather-resistant construction eliminates the need to compromise between performance and space constraints. If your application demands high-sensitivity reception in confined mounting areas with flexible wiring options, order the Garmin GPS 18x LVC (model 010-00321-36) with 5-meter cable and simplify your integration process today.
In The Box
- GPS 18x with serial, USB or bare wire connection
Manual & Warranty
Garmin Warranty
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Reviews
Ask a Question
Tech Specs
Garmin GPS 18x LVC 5m High-Sensitivity GPS Receiver Module (010-00321-36)
Introduction
The Garmin GPS 18x LVC delivers reliable positioning accuracy within 3 meters for applications where compact form factor and high-sensitivity reception are non-negotiable. Built with 12-parallel-channel tracking and WAAS correction capability, this GPS module achieves consistent performance in urban canyons and areas with partial satellite obstruction where standard receivers struggle. The 5-meter cable configuration makes it ready for immediate integration into marine electronics, vehicle navigation systems, and industrial equipment without additional adapters or extensions.
Key Features
- 12-parallel-channel receiver with WAAS-enabled GPS technology for improved accuracy and faster acquisition times
- Position accuracy of 3 meters (typical), meeting or exceeding performance requirements for fleet tracking and navigation applications
- Compact cylindrical design measuring 2.4 inches (6.1 cm) in diameter for installation in confined spaces and tight enclosures
- Multiple connection interfaces including DB-9 pin serial, USB A-style connector, and bare wire options for flexible system integration
- Pulse-Per-Second (PPS) output synchronized within 1 microsecond of UTC time for timing-critical applications requiring high precision
- Non-volatile memory preserves receiver configuration settings and includes integrated real-time clock functionality
Data Insights
Independent testing shows the Garmin GPS 18x LVC delivers position accuracy approximately 50% better than standard GPS receivers in urban environments with obstructed sky views. The 12-channel parallel architecture provides rapid time-to-first-fix performance while the WAAS correction layer reduces positional error significantly compared to unaided GPS-only solutions. The 1-microsecond PPS output accuracy makes this receiver suitable for network timing and frequency synchronization applications where nanosecond-level precision matters.
Usage Instructions
Connect the GPS 18x LVC using your selected interface—DB-9 serial, USB, or bare wire leads—and mount the integrated magnetic base securely on a metal surface oriented toward the sky. Position the receiver to maximize satellite visibility, avoiding obstructions directly overhead. Configure your connected device to accept either NMEA 0183 standard output format or Garmin proprietary protocol as required by your application. After initial power-up, allow 2-3 minutes for cold start acquisition on first use.
Design & Material
The GPS 18x LVC combines compact engineering with rugged construction. Its cylindrical profile minimizes footprint while the integrated magnetic base enables instant repositioning on any ferrous surface without drilling or brackets. The weather-resistant black housing withstands temperature fluctuations and exposure to salt spray, making it suitable for marine and outdoor fleet applications where corrosion presents a real challenge.
- Weather-resistant molded plastic casing rated for marine and industrial environments
- Integrated magnetic base with standard 1/4"-20 threaded mount point for alternative installations
- 5-meter attached cable with your selected connector termination (DB-9, USB A, or bare wire)
- Matte black finish reduces glare and resists fingerprints during handling and installation
- Lightweight construction under 4 ounces reduces weight penalty in vehicle and portable applications
- Modular design allows straightforward replacement or upgrade without system redesign
Final Verdict
The Garmin GPS 18x LVC is the practical choice for equipment builders and integrators who need reliable sub-3-meter positioning in small packages. The combination of proven WAAS-corrected accuracy, multiple connectivity options, and robust weather-resistant construction eliminates the need to compromise between performance and space constraints. If your application demands high-sensitivity reception in confined mounting areas with flexible wiring options, order the Garmin GPS 18x LVC (model 010-00321-36) with 5-meter cable and simplify your integration process today.
In The Box
- GPS 18x with serial, USB or bare wire connection
Manual & Warranty
Trade-In
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Overview
Garmin GPS 18x LVC 5m High-Sensitivity GPS Receiver Module (010-00321-36)
Introduction
The Garmin GPS 18x LVC delivers reliable positioning accuracy within 3 meters for applications where compact form factor and high-sensitivity reception are non-negotiable. Built with 12-parallel-channel tracking and WAAS correction capability, this GPS module achieves consistent performance in urban canyons and areas with partial satellite obstruction where standard receivers struggle. The 5-meter cable configuration makes it ready for immediate integration into marine electronics, vehicle navigation systems, and industrial equipment without additional adapters or extensions.
Key Features
- 12-parallel-channel receiver with WAAS-enabled GPS technology for improved accuracy and faster acquisition times
- Position accuracy of 3 meters (typical), meeting or exceeding performance requirements for fleet tracking and navigation applications
- Compact cylindrical design measuring 2.4 inches (6.1 cm) in diameter for installation in confined spaces and tight enclosures
- Multiple connection interfaces including DB-9 pin serial, USB A-style connector, and bare wire options for flexible system integration
- Pulse-Per-Second (PPS) output synchronized within 1 microsecond of UTC time for timing-critical applications requiring high precision
- Non-volatile memory preserves receiver configuration settings and includes integrated real-time clock functionality
Data Insights
Independent testing shows the Garmin GPS 18x LVC delivers position accuracy approximately 50% better than standard GPS receivers in urban environments with obstructed sky views. The 12-channel parallel architecture provides rapid time-to-first-fix performance while the WAAS correction layer reduces positional error significantly compared to unaided GPS-only solutions. The 1-microsecond PPS output accuracy makes this receiver suitable for network timing and frequency synchronization applications where nanosecond-level precision matters.
Usage Instructions
Connect the GPS 18x LVC using your selected interface—DB-9 serial, USB, or bare wire leads—and mount the integrated magnetic base securely on a metal surface oriented toward the sky. Position the receiver to maximize satellite visibility, avoiding obstructions directly overhead. Configure your connected device to accept either NMEA 0183 standard output format or Garmin proprietary protocol as required by your application. After initial power-up, allow 2-3 minutes for cold start acquisition on first use.
Design & Material
The GPS 18x LVC combines compact engineering with rugged construction. Its cylindrical profile minimizes footprint while the integrated magnetic base enables instant repositioning on any ferrous surface without drilling or brackets. The weather-resistant black housing withstands temperature fluctuations and exposure to salt spray, making it suitable for marine and outdoor fleet applications where corrosion presents a real challenge.
- Weather-resistant molded plastic casing rated for marine and industrial environments
- Integrated magnetic base with standard 1/4"-20 threaded mount point for alternative installations
- 5-meter attached cable with your selected connector termination (DB-9, USB A, or bare wire)
- Matte black finish reduces glare and resists fingerprints during handling and installation
- Lightweight construction under 4 ounces reduces weight penalty in vehicle and portable applications
- Modular design allows straightforward replacement or upgrade without system redesign
Final Verdict
The Garmin GPS 18x LVC is the practical choice for equipment builders and integrators who need reliable sub-3-meter positioning in small packages. The combination of proven WAAS-corrected accuracy, multiple connectivity options, and robust weather-resistant construction eliminates the need to compromise between performance and space constraints. If your application demands high-sensitivity reception in confined mounting areas with flexible wiring options, order the Garmin GPS 18x LVC (model 010-00321-36) with 5-meter cable and simplify your integration process today.
