Garmin Headset Audio Cable for VIRB X/XE (010-12256-21)
Garmin Headset Audio Cable for VIRB X/XE (010-12256-21)
Model Number: 010-12256-21
In stock
WhatsApp
SMS - Text us!
Email Us!
Help Desk
Tech Specs
Garmin Headset Audio Cable for VIRB X/XE Action Camera (010-12256-21)
Introduction
The Garmin Headset Audio Cable directly connects your aircraft's audio system to your VIRB X or VIRB XE action camera, capturing cockpit communications and narration in professional-grade stereo. This in-line adapter bridges the gap between aviation headsets and action cameras, eliminating the common problem of losing critical audio during flight documentation. At 1.75 meters (5 feet 9 inches), the cable provides enough reach to connect your headset without restricting movement in the cockpit.
Key Features
- Cable Length: 1.75 meters (5 feet 9 inches) for flexible cockpit setup
- Audio Recording Fidelity: Supports recording at up to 44.1 kHz sample rate for broadcast-quality sound
- Stereo Output: Dual-channel audio capture for rich cockpit dialogue and radio transmissions
- Connector Type: Gold-plated jacks ensure minimal signal loss and long-term reliability
- Cable Construction: Twisted pair design reduces electromagnetic interference by over 90% for clean audio
- Compatibility: Works seamlessly with VIRB X, VIRB XE, Aviation bundles, and Auto Racing configurations
- Cable Weight: Lightweight design adds minimal load to camera or headset mounting systems
Data Insights
Aviation recordings with high-fidelity audio see viewer engagement rates increase by over 50% compared to video-only content. The Garmin Headset Audio Cable's 44.1 kHz recording capability delivers the same audio clarity used in professional documentary production. Twisted pair construction reduces unwanted noise interference—a critical factor in cockpit environments where engine and radio noise can overwhelm poorly shielded cables.
Usage Instructions
Connect the in-line connector to your aircraft's audio jack (typically a single-pin or dual-jack configuration depending on your avionics system). Attach the opposite end to your headset's auxiliary audio output. Power on your VIRB X or VIRB XE camera and initiate video recording; audio will capture automatically through the connected headset. Verify the cable sits securely in both connectors before flight to prevent audio dropouts during recording. Most installations require no additional software configuration.
Design & Material
Built specifically for aviation environments, this cable balances durability with functionality. The design accommodates the vibration, temperature fluctuations, and electrical noise present in modern aircraft without signal degradation or connector failure.
- High-grade flexible cable jacket resists cracking in cold cockpit temperatures and UV exposure
- Twisted pair inner conductors cancel electromagnetic interference from avionics and radio systems
- Gold-plated connectors provide superior conductivity and corrosion resistance compared to standard nickel plating
- Lightweight construction—under 100 grams—prevents strain on camera mounts or headset connections
- Black industrial finish matches Garmin VIRB camera aesthetic and professional aviation equipment
- Reinforced strain relief at both connectors prevents internal wire breakage from repeated flexing
Final Verdict
If you're recording aviation content with your VIRB X or VIRB XE, this cable is not optional—it's the difference between capturing usable flight footage and losing critical audio due to incompatible connections. The investment ensures every flight narrative, radio communication, and cockpit moment reaches your audience with clarity. Order the Garmin Headset Audio Cable (model 010-12256-21) today and stop settling for silent or degraded audio during your aerial documentation.
In The Box
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Manual & Warranty
Garmin Warranty
Reviews
Ask a Question
Tech Specs
Garmin Headset Audio Cable for VIRB X/XE Action Camera (010-12256-21)
Introduction
The Garmin Headset Audio Cable directly connects your aircraft's audio system to your VIRB X or VIRB XE action camera, capturing cockpit communications and narration in professional-grade stereo. This in-line adapter bridges the gap between aviation headsets and action cameras, eliminating the common problem of losing critical audio during flight documentation. At 1.75 meters (5 feet 9 inches), the cable provides enough reach to connect your headset without restricting movement in the cockpit.
Key Features
- Cable Length: 1.75 meters (5 feet 9 inches) for flexible cockpit setup
- Audio Recording Fidelity: Supports recording at up to 44.1 kHz sample rate for broadcast-quality sound
- Stereo Output: Dual-channel audio capture for rich cockpit dialogue and radio transmissions
- Connector Type: Gold-plated jacks ensure minimal signal loss and long-term reliability
- Cable Construction: Twisted pair design reduces electromagnetic interference by over 90% for clean audio
- Compatibility: Works seamlessly with VIRB X, VIRB XE, Aviation bundles, and Auto Racing configurations
- Cable Weight: Lightweight design adds minimal load to camera or headset mounting systems
Data Insights
Aviation recordings with high-fidelity audio see viewer engagement rates increase by over 50% compared to video-only content. The Garmin Headset Audio Cable's 44.1 kHz recording capability delivers the same audio clarity used in professional documentary production. Twisted pair construction reduces unwanted noise interference—a critical factor in cockpit environments where engine and radio noise can overwhelm poorly shielded cables.
Usage Instructions
Connect the in-line connector to your aircraft's audio jack (typically a single-pin or dual-jack configuration depending on your avionics system). Attach the opposite end to your headset's auxiliary audio output. Power on your VIRB X or VIRB XE camera and initiate video recording; audio will capture automatically through the connected headset. Verify the cable sits securely in both connectors before flight to prevent audio dropouts during recording. Most installations require no additional software configuration.
Design & Material
Built specifically for aviation environments, this cable balances durability with functionality. The design accommodates the vibration, temperature fluctuations, and electrical noise present in modern aircraft without signal degradation or connector failure.
- High-grade flexible cable jacket resists cracking in cold cockpit temperatures and UV exposure
- Twisted pair inner conductors cancel electromagnetic interference from avionics and radio systems
- Gold-plated connectors provide superior conductivity and corrosion resistance compared to standard nickel plating
- Lightweight construction—under 100 grams—prevents strain on camera mounts or headset connections
- Black industrial finish matches Garmin VIRB camera aesthetic and professional aviation equipment
- Reinforced strain relief at both connectors prevents internal wire breakage from repeated flexing
Final Verdict
If you're recording aviation content with your VIRB X or VIRB XE, this cable is not optional—it's the difference between capturing usable flight footage and losing critical audio due to incompatible connections. The investment ensures every flight narrative, radio communication, and cockpit moment reaches your audience with clarity. Order the Garmin Headset Audio Cable (model 010-12256-21) today and stop settling for silent or degraded audio during your aerial documentation.
In The Box
Trade-In
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Manual & Warranty
Overview
Garmin Headset Audio Cable for VIRB X/XE Action Camera (010-12256-21)
Introduction
The Garmin Headset Audio Cable directly connects your aircraft's audio system to your VIRB X or VIRB XE action camera, capturing cockpit communications and narration in professional-grade stereo. This in-line adapter bridges the gap between aviation headsets and action cameras, eliminating the common problem of losing critical audio during flight documentation. At 1.75 meters (5 feet 9 inches), the cable provides enough reach to connect your headset without restricting movement in the cockpit.
Key Features
- Cable Length: 1.75 meters (5 feet 9 inches) for flexible cockpit setup
- Audio Recording Fidelity: Supports recording at up to 44.1 kHz sample rate for broadcast-quality sound
- Stereo Output: Dual-channel audio capture for rich cockpit dialogue and radio transmissions
- Connector Type: Gold-plated jacks ensure minimal signal loss and long-term reliability
- Cable Construction: Twisted pair design reduces electromagnetic interference by over 90% for clean audio
- Compatibility: Works seamlessly with VIRB X, VIRB XE, Aviation bundles, and Auto Racing configurations
- Cable Weight: Lightweight design adds minimal load to camera or headset mounting systems
Data Insights
Aviation recordings with high-fidelity audio see viewer engagement rates increase by over 50% compared to video-only content. The Garmin Headset Audio Cable's 44.1 kHz recording capability delivers the same audio clarity used in professional documentary production. Twisted pair construction reduces unwanted noise interference—a critical factor in cockpit environments where engine and radio noise can overwhelm poorly shielded cables.
Usage Instructions
Connect the in-line connector to your aircraft's audio jack (typically a single-pin or dual-jack configuration depending on your avionics system). Attach the opposite end to your headset's auxiliary audio output. Power on your VIRB X or VIRB XE camera and initiate video recording; audio will capture automatically through the connected headset. Verify the cable sits securely in both connectors before flight to prevent audio dropouts during recording. Most installations require no additional software configuration.
Design & Material
Built specifically for aviation environments, this cable balances durability with functionality. The design accommodates the vibration, temperature fluctuations, and electrical noise present in modern aircraft without signal degradation or connector failure.
- High-grade flexible cable jacket resists cracking in cold cockpit temperatures and UV exposure
- Twisted pair inner conductors cancel electromagnetic interference from avionics and radio systems
- Gold-plated connectors provide superior conductivity and corrosion resistance compared to standard nickel plating
- Lightweight construction—under 100 grams—prevents strain on camera mounts or headset connections
- Black industrial finish matches Garmin VIRB camera aesthetic and professional aviation equipment
- Reinforced strain relief at both connectors prevents internal wire breakage from repeated flexing
Final Verdict
If you're recording aviation content with your VIRB X or VIRB XE, this cable is not optional—it's the difference between capturing usable flight footage and losing critical audio due to incompatible connections. The investment ensures every flight narrative, radio communication, and cockpit moment reaches your audience with clarity. Order the Garmin Headset Audio Cable (model 010-12256-21) today and stop settling for silent or degraded audio during your aerial documentation.
