Garmin Power/Data Cable (Bare Wires)
Garmin Power/Data Cable (Bare Wires)
Model Number: 010-10083-00
In stock
WhatsApp
SMS - Text us!
Email Us!
Help Desk
Tech Specs
Garmin Power/Data Cable (Bare Wires) — 6-Foot Marine-Grade Connection
Introduction
The Garmin Power/Data Cable (Bare Wires, model 010-10083-00) delivers reliable power and data transmission to your Garmin chartplotters, fishfinders, and GPS units through direct hard-wired connections. This marine-grade cable is engineered to maintain signal integrity and power delivery in salt-water environments, enabling your navigation and sonar systems to operate at peak performance without the signal loss or connection failures common with surface-mount connectors.
Key Features
- 6-foot cable length for extended reach from power source to device
- Bare wire termination (no pre-installed connectors) for custom hard-wiring installations
- Multi-stranded wire construction supporting improved electrical conductivity and flexibility
- Color-coded individual wires for accurate power and data line identification
- Heavy-duty marine-grade insulation rated for saltwater, UV, and fuel exposure
- Compatible with Garmin Fishfinder 320C, GPSMAP series units, and similar marine electronics requiring direct power and data connections
Data Insights
Direct power and data connections like those enabled by this cable deliver approximately 30% improvement in data accuracy and communication efficiency compared to surface-mount connectors. Hard-wired installations eliminate intermittent connection issues that degrade GPS positioning accuracy and sonar data transmission, resulting in more reliable speed, position, and depth readings throughout your system.
Usage Instructions
Strip approximately 0.5 inches of insulation from each bare wire end. Connect the exposed wires directly to your DC power source or compatible Garmin device using marine-grade connectors or solder terminals, ensuring all connections are mechanically and electrically secure. Verify wire polarity and proper termination before applying power to prevent data corruption or equipment damage.
Design & Material
This cable combines durability with flexibility, designed specifically for the demands of marine installation. The robust construction balances maneuverability during routing with structural integrity under vibration and thermal cycling.
- Marine-grade outer jacket provides corrosion and UV resistance in saltwater environments
- Multi-stranded copper conductors maintain flexibility while reducing signal degradation over the 6-foot run
- Heavy-duty insulation withstands exposure to fuel vapors, salt spray, and direct sunlight without cracking
- Individual color-coded wires (power, ground, data lines) eliminate installation guesswork and connection errors
- Bare wire termination allows installation in custom panel layouts and retrofit applications
- Lightweight construction facilitates routing through tight spaces behind consoles and through bulkheads
Final Verdict
If your Garmin installation requires a direct hard-wired power and data connection, this cable is the correct solution. The bare wire design eliminates proprietary connector limitations and ensures maximum compatibility with custom marine electrical systems. Order the Garmin Power/Data Cable (Bare Wires) today to achieve the reliable, accurate performance your navigation and sonar systems demand.
In The Box
What's in the Box:
- Garmin Power/data cable (bare wires)
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Manual & Warranty
Garmin Warranty
Reviews
Ask a Question
Tech Specs
Garmin Power/Data Cable (Bare Wires) — 6-Foot Marine-Grade Connection
Introduction
The Garmin Power/Data Cable (Bare Wires, model 010-10083-00) delivers reliable power and data transmission to your Garmin chartplotters, fishfinders, and GPS units through direct hard-wired connections. This marine-grade cable is engineered to maintain signal integrity and power delivery in salt-water environments, enabling your navigation and sonar systems to operate at peak performance without the signal loss or connection failures common with surface-mount connectors.
Key Features
- 6-foot cable length for extended reach from power source to device
- Bare wire termination (no pre-installed connectors) for custom hard-wiring installations
- Multi-stranded wire construction supporting improved electrical conductivity and flexibility
- Color-coded individual wires for accurate power and data line identification
- Heavy-duty marine-grade insulation rated for saltwater, UV, and fuel exposure
- Compatible with Garmin Fishfinder 320C, GPSMAP series units, and similar marine electronics requiring direct power and data connections
Data Insights
Direct power and data connections like those enabled by this cable deliver approximately 30% improvement in data accuracy and communication efficiency compared to surface-mount connectors. Hard-wired installations eliminate intermittent connection issues that degrade GPS positioning accuracy and sonar data transmission, resulting in more reliable speed, position, and depth readings throughout your system.
Usage Instructions
Strip approximately 0.5 inches of insulation from each bare wire end. Connect the exposed wires directly to your DC power source or compatible Garmin device using marine-grade connectors or solder terminals, ensuring all connections are mechanically and electrically secure. Verify wire polarity and proper termination before applying power to prevent data corruption or equipment damage.
Design & Material
This cable combines durability with flexibility, designed specifically for the demands of marine installation. The robust construction balances maneuverability during routing with structural integrity under vibration and thermal cycling.
- Marine-grade outer jacket provides corrosion and UV resistance in saltwater environments
- Multi-stranded copper conductors maintain flexibility while reducing signal degradation over the 6-foot run
- Heavy-duty insulation withstands exposure to fuel vapors, salt spray, and direct sunlight without cracking
- Individual color-coded wires (power, ground, data lines) eliminate installation guesswork and connection errors
- Bare wire termination allows installation in custom panel layouts and retrofit applications
- Lightweight construction facilitates routing through tight spaces behind consoles and through bulkheads
Final Verdict
If your Garmin installation requires a direct hard-wired power and data connection, this cable is the correct solution. The bare wire design eliminates proprietary connector limitations and ensures maximum compatibility with custom marine electrical systems. Order the Garmin Power/Data Cable (Bare Wires) today to achieve the reliable, accurate performance your navigation and sonar systems demand.
In The Box
What's in the Box:
- Garmin Power/data cable (bare wires)
Trade-In
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Manual & Warranty
Overview
Garmin Power/Data Cable (Bare Wires) — 6-Foot Marine-Grade Connection
Introduction
The Garmin Power/Data Cable (Bare Wires, model 010-10083-00) delivers reliable power and data transmission to your Garmin chartplotters, fishfinders, and GPS units through direct hard-wired connections. This marine-grade cable is engineered to maintain signal integrity and power delivery in salt-water environments, enabling your navigation and sonar systems to operate at peak performance without the signal loss or connection failures common with surface-mount connectors.
Key Features
- 6-foot cable length for extended reach from power source to device
- Bare wire termination (no pre-installed connectors) for custom hard-wiring installations
- Multi-stranded wire construction supporting improved electrical conductivity and flexibility
- Color-coded individual wires for accurate power and data line identification
- Heavy-duty marine-grade insulation rated for saltwater, UV, and fuel exposure
- Compatible with Garmin Fishfinder 320C, GPSMAP series units, and similar marine electronics requiring direct power and data connections
Data Insights
Direct power and data connections like those enabled by this cable deliver approximately 30% improvement in data accuracy and communication efficiency compared to surface-mount connectors. Hard-wired installations eliminate intermittent connection issues that degrade GPS positioning accuracy and sonar data transmission, resulting in more reliable speed, position, and depth readings throughout your system.
Usage Instructions
Strip approximately 0.5 inches of insulation from each bare wire end. Connect the exposed wires directly to your DC power source or compatible Garmin device using marine-grade connectors or solder terminals, ensuring all connections are mechanically and electrically secure. Verify wire polarity and proper termination before applying power to prevent data corruption or equipment damage.
Design & Material
This cable combines durability with flexibility, designed specifically for the demands of marine installation. The robust construction balances maneuverability during routing with structural integrity under vibration and thermal cycling.
- Marine-grade outer jacket provides corrosion and UV resistance in saltwater environments
- Multi-stranded copper conductors maintain flexibility while reducing signal degradation over the 6-foot run
- Heavy-duty insulation withstands exposure to fuel vapors, salt spray, and direct sunlight without cracking
- Individual color-coded wires (power, ground, data lines) eliminate installation guesswork and connection errors
- Bare wire termination allows installation in custom panel layouts and retrofit applications
- Lightweight construction facilitates routing through tight spaces behind consoles and through bulkheads
Final Verdict
If your Garmin installation requires a direct hard-wired power and data connection, this cable is the correct solution. The bare wire design eliminates proprietary connector limitations and ensures maximum compatibility with custom marine electrical systems. Order the Garmin Power/Data Cable (Bare Wires) today to achieve the reliable, accurate performance your navigation and sonar systems demand.
