Garmin Power/Data Cable (for GPS 19x HVS)
Garmin Power/Data Cable (for GPS 19x HVS)
Model Number: 010-11824-00
In stock
WhatsApp
SMS - Text us!
Email Us!
Help Desk
Tech Specs
Garmin Power/Data Cable for GPS 19x HVS
Introduction
The Garmin Power/Data Cable (model 010-11824-00) delivers reliable direct hardwiring connectivity between your Garmin GPS 19x HVS receiver and NMEA 0183-compatible marine instruments. This purpose-built cable eliminates connection ambiguity by providing a dedicated, wired solution for real-time position, velocity, and time data transmission—critical information for navigation accuracy on water or land. Unlike wireless alternatives, hardwired connections eliminate latency delays and provide consistent signal integrity in demanding marine environments.
Key Features
- 10-foot cable length enabling flexible installation configurations in larger vessel cabins and control rooms
- 1 Hz operational frequency delivering position and velocity updates every single second for real-time navigation response
- Direct NMEA 0183 protocol compatibility with standard marine electronics including chartplotters, autopilots, and fishfinders
- Color-coded conductors (red, blue, orange, black, white) streamlining installation and reducing connection errors
- Hardwired connection architecture reducing data transmission latency by approximately 30% compared to wireless systems
- Weather-resistant construction rated for continuous saltwater, freshwater, and UV exposure typical of marine duty cycles
Data Insights
Direct hardwiring delivers measurable performance advantages over wireless GPS connectivity. With 1 Hz update frequency, this cable transmits positional and velocity information every second, enabling responsive course corrections in dynamic navigation scenarios. The elimination of wireless latency—studies show hardwired marine systems achieve approximately 30% faster data delivery than comparable wireless installations—translates to tighter heading control and reduced cross-track error during precision approaches or anchoring operations.
Usage Instructions
Connect the Garmin Power/Data Cable between the GPS 19x HVS 9-pin connector and your NMEA 0183-compatible marine device's input port. Verify secure mechanical connection at both ends and confirm proper power supply to your GPS unit. Route the cable away from engine ignition wiring and high-current power lines to minimize electromagnetic noise. Allow the system 30 seconds to establish data communication and verify correct position and time display on your connected instrument before commencing navigation.
Design and Material
This cable combines marine-grade construction materials with practical installation features. The white jacket provides UV resistance and visual identification in tight installation spaces, while internal shielding protects the data conductors from electromagnetic interference generated by marine engine systems and high-power radio equipment.
- White polyurethane outer jacket resists UV degradation, saltwater corrosion, and temperature extremes from -20 to 70 degrees Celsius
- Color-coded internal conductors (red, blue, orange, black, white) correspond directly to NMEA 0183 signal standards, eliminating guesswork during installation
- Strain relief connectors at both cable terminations reduce flexing stress and extend service life in high-vibration applications
- Lightweight construction (under 2 pounds) facilitates routing through tight cockpit and cabin spaces without requiring additional cable supports
- Black molded connector housings on both ends provide durable, corrosion-resistant termination points rated for freshwater and saltwater environments
- Braided shielding minimizes signal degradation from adjacent AC wiring, engine harnesses, and VHF radio systems common on marine vessels
Final Verdict
The Garmin Power/Data Cable (GPS 19x HVS) is the essential hardwired connection bridge between your high-accuracy receiver and integrated marine navigation ecosystem. Its 10-foot reach, 1 Hz update rate, and proven 30% latency reduction make it a practical choice for any installation demanding real-time positioning reliability. If your navigation system relies on Garmin GPS 19x HVS data, this cable eliminates connection variables and ensures consistent performance across every voyage.
In The Box
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Manual & Warranty
Garmin Warranty
Reviews
Ask a Question
Tech Specs
Garmin Power/Data Cable for GPS 19x HVS
Introduction
The Garmin Power/Data Cable (model 010-11824-00) delivers reliable direct hardwiring connectivity between your Garmin GPS 19x HVS receiver and NMEA 0183-compatible marine instruments. This purpose-built cable eliminates connection ambiguity by providing a dedicated, wired solution for real-time position, velocity, and time data transmission—critical information for navigation accuracy on water or land. Unlike wireless alternatives, hardwired connections eliminate latency delays and provide consistent signal integrity in demanding marine environments.
Key Features
- 10-foot cable length enabling flexible installation configurations in larger vessel cabins and control rooms
- 1 Hz operational frequency delivering position and velocity updates every single second for real-time navigation response
- Direct NMEA 0183 protocol compatibility with standard marine electronics including chartplotters, autopilots, and fishfinders
- Color-coded conductors (red, blue, orange, black, white) streamlining installation and reducing connection errors
- Hardwired connection architecture reducing data transmission latency by approximately 30% compared to wireless systems
- Weather-resistant construction rated for continuous saltwater, freshwater, and UV exposure typical of marine duty cycles
Data Insights
Direct hardwiring delivers measurable performance advantages over wireless GPS connectivity. With 1 Hz update frequency, this cable transmits positional and velocity information every second, enabling responsive course corrections in dynamic navigation scenarios. The elimination of wireless latency—studies show hardwired marine systems achieve approximately 30% faster data delivery than comparable wireless installations—translates to tighter heading control and reduced cross-track error during precision approaches or anchoring operations.
Usage Instructions
Connect the Garmin Power/Data Cable between the GPS 19x HVS 9-pin connector and your NMEA 0183-compatible marine device's input port. Verify secure mechanical connection at both ends and confirm proper power supply to your GPS unit. Route the cable away from engine ignition wiring and high-current power lines to minimize electromagnetic noise. Allow the system 30 seconds to establish data communication and verify correct position and time display on your connected instrument before commencing navigation.
Design and Material
This cable combines marine-grade construction materials with practical installation features. The white jacket provides UV resistance and visual identification in tight installation spaces, while internal shielding protects the data conductors from electromagnetic interference generated by marine engine systems and high-power radio equipment.
- White polyurethane outer jacket resists UV degradation, saltwater corrosion, and temperature extremes from -20 to 70 degrees Celsius
- Color-coded internal conductors (red, blue, orange, black, white) correspond directly to NMEA 0183 signal standards, eliminating guesswork during installation
- Strain relief connectors at both cable terminations reduce flexing stress and extend service life in high-vibration applications
- Lightweight construction (under 2 pounds) facilitates routing through tight cockpit and cabin spaces without requiring additional cable supports
- Black molded connector housings on both ends provide durable, corrosion-resistant termination points rated for freshwater and saltwater environments
- Braided shielding minimizes signal degradation from adjacent AC wiring, engine harnesses, and VHF radio systems common on marine vessels
Final Verdict
The Garmin Power/Data Cable (GPS 19x HVS) is the essential hardwired connection bridge between your high-accuracy receiver and integrated marine navigation ecosystem. Its 10-foot reach, 1 Hz update rate, and proven 30% latency reduction make it a practical choice for any installation demanding real-time positioning reliability. If your navigation system relies on Garmin GPS 19x HVS data, this cable eliminates connection variables and ensures consistent performance across every voyage.
In The Box
Trade-In
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Manual & Warranty
Overview
Garmin Power/Data Cable for GPS 19x HVS
Introduction
The Garmin Power/Data Cable (model 010-11824-00) delivers reliable direct hardwiring connectivity between your Garmin GPS 19x HVS receiver and NMEA 0183-compatible marine instruments. This purpose-built cable eliminates connection ambiguity by providing a dedicated, wired solution for real-time position, velocity, and time data transmission—critical information for navigation accuracy on water or land. Unlike wireless alternatives, hardwired connections eliminate latency delays and provide consistent signal integrity in demanding marine environments.
Key Features
- 10-foot cable length enabling flexible installation configurations in larger vessel cabins and control rooms
- 1 Hz operational frequency delivering position and velocity updates every single second for real-time navigation response
- Direct NMEA 0183 protocol compatibility with standard marine electronics including chartplotters, autopilots, and fishfinders
- Color-coded conductors (red, blue, orange, black, white) streamlining installation and reducing connection errors
- Hardwired connection architecture reducing data transmission latency by approximately 30% compared to wireless systems
- Weather-resistant construction rated for continuous saltwater, freshwater, and UV exposure typical of marine duty cycles
Data Insights
Direct hardwiring delivers measurable performance advantages over wireless GPS connectivity. With 1 Hz update frequency, this cable transmits positional and velocity information every second, enabling responsive course corrections in dynamic navigation scenarios. The elimination of wireless latency—studies show hardwired marine systems achieve approximately 30% faster data delivery than comparable wireless installations—translates to tighter heading control and reduced cross-track error during precision approaches or anchoring operations.
Usage Instructions
Connect the Garmin Power/Data Cable between the GPS 19x HVS 9-pin connector and your NMEA 0183-compatible marine device's input port. Verify secure mechanical connection at both ends and confirm proper power supply to your GPS unit. Route the cable away from engine ignition wiring and high-current power lines to minimize electromagnetic noise. Allow the system 30 seconds to establish data communication and verify correct position and time display on your connected instrument before commencing navigation.
Design and Material
This cable combines marine-grade construction materials with practical installation features. The white jacket provides UV resistance and visual identification in tight installation spaces, while internal shielding protects the data conductors from electromagnetic interference generated by marine engine systems and high-power radio equipment.
- White polyurethane outer jacket resists UV degradation, saltwater corrosion, and temperature extremes from -20 to 70 degrees Celsius
- Color-coded internal conductors (red, blue, orange, black, white) correspond directly to NMEA 0183 signal standards, eliminating guesswork during installation
- Strain relief connectors at both cable terminations reduce flexing stress and extend service life in high-vibration applications
- Lightweight construction (under 2 pounds) facilitates routing through tight cockpit and cabin spaces without requiring additional cable supports
- Black molded connector housings on both ends provide durable, corrosion-resistant termination points rated for freshwater and saltwater environments
- Braided shielding minimizes signal degradation from adjacent AC wiring, engine harnesses, and VHF radio systems common on marine vessels
Final Verdict
The Garmin Power/Data Cable (GPS 19x HVS) is the essential hardwired connection bridge between your high-accuracy receiver and integrated marine navigation ecosystem. Its 10-foot reach, 1 Hz update rate, and proven 30% latency reduction make it a practical choice for any installation demanding real-time positioning reliability. If your navigation system relies on Garmin GPS 19x HVS data, this cable eliminates connection variables and ensures consistent performance across every voyage.
