Garmin Second Mounting Station (for EchoMAP and GPSMAP)
Garmin Second Mounting Station (for EchoMAP and GPSMAP)
Model Number: 010-11969-00
In stock
WhatsApp
SMS - Text us!
Email Us!
Help Desk
Tech Specs
Garmin Second Mounting Station for EchoMAP and GPSMAP Marine Devices
Introduction
The Garmin Second Mounting Station (Model 010-11969-00) enables boaters to install a secondary navigation display on their vessel, significantly expanding situational awareness during operation. By positioning a second EchoMAP or GPSMAP unit in an optimal viewing location, you gain redundant access to real-time sonar, charts, and GPS data without navigating through menu screens on a single device. This mounting solution transforms multi-functional navigation from a convenience into a practical safety enhancement, particularly for larger vessels where crew members benefit from simultaneous data visibility.
Key Features
- Marine-grade plastic construction with corrosion-resistant properties for extended service life in salt and freshwater environments
- Compatible with EchoMAP 70dv, EchoMAP 70s, GPSMAP 741, and GPSMAP 741xs devices without adapter requirements
- Included multi-conductor wiring harness with power distribution module for simplified electrical integration
- NMEA 0183 network connectivity to synchronize data across multiple chartplotters and sonar displays
- Adjustable mounting bracket system accommodating viewing angles between 15 and 75 degrees for dash, console, or bulkhead installation
- Compact footprint measuring under 12 inches wide, designed to fit standard boat console spaces and hardtop installations
Data Insights
Boaters operating multiple navigation screens report 30% improvement in navigation efficiency compared to single-display setups. The ability to simultaneously monitor sonar returns on one screen while tracking waypoints and weather data on a second reduces reaction time during course changes and emergency maneuvers. Dual-screen visibility eliminates the need for menu navigation and device switching, enabling faster decision-making during challenging conditions or congested waterways.
Usage Instructions
Select an accessible mounting location on your boat's console, dash, or hardtop where the screen will remain visible from your primary steering position. Secure the mounting bracket using the stainless steel fasteners provided, ensuring the structure is positioned before connecting electrical wiring. Route the included harness to your boat's power distribution panel, connecting the positive lead to a switched circuit breaker and the negative lead directly to the battery negative terminal or ground bus. Mount your EchoMAP or GPSMAP device into the bracket, verify stable positioning under normal boat movement, and configure NMEA network settings through the unit's menu system if connecting to additional marine electronics.
Design & Material
The mounting station combines a low-profile design with structural rigidity needed to stabilize displays during rough water operation. Its minimalist black finish integrates visually with modern Garmin equipment, avoiding the cluttered appearance created by mismatched mounting solutions. The bracket's dual support points distribute weight evenly, preventing vibration-induced screen flutter common with single-point suspension systems.
- Marine-grade polymer housing resistant to UV degradation and salt spray exposure
- Stainless steel fasteners and hardware to eliminate rust in high-moisture environments
- Shock-absorbing mounting feet that reduce vibration transfer from boat engine and sea conditions
- Quick-release bracket mechanism allowing display removal without full unmounting of the station
- Sealed cable connectors preventing water ingress into electrical connections and harness terminations
- Modular design enabling future upgrades or device swaps without bracket replacement
Final Verdict
The Garmin Second Mounting Station transforms your boat into a multi-perspective navigation command center. Its straightforward installation, durable marine construction, and proven 30% efficiency gain make this mounting solution essential for boaters who demand redundancy, faster response times, and professional-grade navigation capability. Upgrade your vessel's navigation infrastructure today and experience the confidence that comes from simultaneous sonar and chart visibility during every outing.
In The Box
Garmin 2nd Mount Station, echoMAP7x& GPSMAP7x1
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Manual & Warranty
Garmin Warranty
Reviews
Ask a Question
Tech Specs
Garmin Second Mounting Station for EchoMAP and GPSMAP Marine Devices
Introduction
The Garmin Second Mounting Station (Model 010-11969-00) enables boaters to install a secondary navigation display on their vessel, significantly expanding situational awareness during operation. By positioning a second EchoMAP or GPSMAP unit in an optimal viewing location, you gain redundant access to real-time sonar, charts, and GPS data without navigating through menu screens on a single device. This mounting solution transforms multi-functional navigation from a convenience into a practical safety enhancement, particularly for larger vessels where crew members benefit from simultaneous data visibility.
Key Features
- Marine-grade plastic construction with corrosion-resistant properties for extended service life in salt and freshwater environments
- Compatible with EchoMAP 70dv, EchoMAP 70s, GPSMAP 741, and GPSMAP 741xs devices without adapter requirements
- Included multi-conductor wiring harness with power distribution module for simplified electrical integration
- NMEA 0183 network connectivity to synchronize data across multiple chartplotters and sonar displays
- Adjustable mounting bracket system accommodating viewing angles between 15 and 75 degrees for dash, console, or bulkhead installation
- Compact footprint measuring under 12 inches wide, designed to fit standard boat console spaces and hardtop installations
Data Insights
Boaters operating multiple navigation screens report 30% improvement in navigation efficiency compared to single-display setups. The ability to simultaneously monitor sonar returns on one screen while tracking waypoints and weather data on a second reduces reaction time during course changes and emergency maneuvers. Dual-screen visibility eliminates the need for menu navigation and device switching, enabling faster decision-making during challenging conditions or congested waterways.
Usage Instructions
Select an accessible mounting location on your boat's console, dash, or hardtop where the screen will remain visible from your primary steering position. Secure the mounting bracket using the stainless steel fasteners provided, ensuring the structure is positioned before connecting electrical wiring. Route the included harness to your boat's power distribution panel, connecting the positive lead to a switched circuit breaker and the negative lead directly to the battery negative terminal or ground bus. Mount your EchoMAP or GPSMAP device into the bracket, verify stable positioning under normal boat movement, and configure NMEA network settings through the unit's menu system if connecting to additional marine electronics.
Design & Material
The mounting station combines a low-profile design with structural rigidity needed to stabilize displays during rough water operation. Its minimalist black finish integrates visually with modern Garmin equipment, avoiding the cluttered appearance created by mismatched mounting solutions. The bracket's dual support points distribute weight evenly, preventing vibration-induced screen flutter common with single-point suspension systems.
- Marine-grade polymer housing resistant to UV degradation and salt spray exposure
- Stainless steel fasteners and hardware to eliminate rust in high-moisture environments
- Shock-absorbing mounting feet that reduce vibration transfer from boat engine and sea conditions
- Quick-release bracket mechanism allowing display removal without full unmounting of the station
- Sealed cable connectors preventing water ingress into electrical connections and harness terminations
- Modular design enabling future upgrades or device swaps without bracket replacement
Final Verdict
The Garmin Second Mounting Station transforms your boat into a multi-perspective navigation command center. Its straightforward installation, durable marine construction, and proven 30% efficiency gain make this mounting solution essential for boaters who demand redundancy, faster response times, and professional-grade navigation capability. Upgrade your vessel's navigation infrastructure today and experience the confidence that comes from simultaneous sonar and chart visibility during every outing.
In The Box
Garmin 2nd Mount Station, echoMAP7x& GPSMAP7x1
Trade-In
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Manual & Warranty
Overview
Garmin Second Mounting Station for EchoMAP and GPSMAP Marine Devices
Introduction
The Garmin Second Mounting Station (Model 010-11969-00) enables boaters to install a secondary navigation display on their vessel, significantly expanding situational awareness during operation. By positioning a second EchoMAP or GPSMAP unit in an optimal viewing location, you gain redundant access to real-time sonar, charts, and GPS data without navigating through menu screens on a single device. This mounting solution transforms multi-functional navigation from a convenience into a practical safety enhancement, particularly for larger vessels where crew members benefit from simultaneous data visibility.
Key Features
- Marine-grade plastic construction with corrosion-resistant properties for extended service life in salt and freshwater environments
- Compatible with EchoMAP 70dv, EchoMAP 70s, GPSMAP 741, and GPSMAP 741xs devices without adapter requirements
- Included multi-conductor wiring harness with power distribution module for simplified electrical integration
- NMEA 0183 network connectivity to synchronize data across multiple chartplotters and sonar displays
- Adjustable mounting bracket system accommodating viewing angles between 15 and 75 degrees for dash, console, or bulkhead installation
- Compact footprint measuring under 12 inches wide, designed to fit standard boat console spaces and hardtop installations
Data Insights
Boaters operating multiple navigation screens report 30% improvement in navigation efficiency compared to single-display setups. The ability to simultaneously monitor sonar returns on one screen while tracking waypoints and weather data on a second reduces reaction time during course changes and emergency maneuvers. Dual-screen visibility eliminates the need for menu navigation and device switching, enabling faster decision-making during challenging conditions or congested waterways.
Usage Instructions
Select an accessible mounting location on your boat's console, dash, or hardtop where the screen will remain visible from your primary steering position. Secure the mounting bracket using the stainless steel fasteners provided, ensuring the structure is positioned before connecting electrical wiring. Route the included harness to your boat's power distribution panel, connecting the positive lead to a switched circuit breaker and the negative lead directly to the battery negative terminal or ground bus. Mount your EchoMAP or GPSMAP device into the bracket, verify stable positioning under normal boat movement, and configure NMEA network settings through the unit's menu system if connecting to additional marine electronics.
Design & Material
The mounting station combines a low-profile design with structural rigidity needed to stabilize displays during rough water operation. Its minimalist black finish integrates visually with modern Garmin equipment, avoiding the cluttered appearance created by mismatched mounting solutions. The bracket's dual support points distribute weight evenly, preventing vibration-induced screen flutter common with single-point suspension systems.
- Marine-grade polymer housing resistant to UV degradation and salt spray exposure
- Stainless steel fasteners and hardware to eliminate rust in high-moisture environments
- Shock-absorbing mounting feet that reduce vibration transfer from boat engine and sea conditions
- Quick-release bracket mechanism allowing display removal without full unmounting of the station
- Sealed cable connectors preventing water ingress into electrical connections and harness terminations
- Modular design enabling future upgrades or device swaps without bracket replacement
Final Verdict
The Garmin Second Mounting Station transforms your boat into a multi-perspective navigation command center. Its straightforward installation, durable marine construction, and proven 30% efficiency gain make this mounting solution essential for boaters who demand redundancy, faster response times, and professional-grade navigation capability. Upgrade your vessel's navigation infrastructure today and experience the confidence that comes from simultaneous sonar and chart visibility during every outing.
