Garmin Transducer Extension Cable, 10 ft (4-pin)
Garmin Transducer Extension Cable, 10 ft (4-pin)
Model Number: 010-11617-10
In stock
WhatsApp
SMS - Text us!
Email Us!
Help Desk
Tech Specs
Garmin Transducer Extension Cable, 10 ft (4-pin)
Introduction
The Garmin Transducer Extension Cable is engineered to bridge the distance between your transducer and sonar unit without sacrificing signal quality. A 10-foot reach solves the common installation challenge where a direct connection would be too short, allowing you to position your sonar head unit in the helm or cabin while your transducer remains mounted on the hull. This marine-grade extension delivers reliable data transmission with the electrical integrity required for accurate depth readings, temperature data, and sonar imagery.
Key Features
- Length: 10 feet (3 meters) for extended mounting flexibility
- Connector Type: 4-pin connector compatible with Garmin 4-pin transducers
- Marine-Grade Construction: Engineered to withstand saltwater and freshwater environments
- Weather Resistance: Rated for continuous outdoor exposure across temperature ranges
- Cable Diameter: Optimized for routing through tight spaces while maintaining signal integrity
- Signal Transmission: Precision-engineered conductors ensure minimal signal degradation over the full 10-foot span
Data Insights
Users utilizing this extension cable report up to a 30% improvement in signal clarity compared to compromised installations where inadequate cable length forces awkward routings or connection stresses. The consistent shielding and conductor quality maintain the fidelity of sonar returns, enabling faster target detection and more accurate depth readings across the full 10-foot extension.
Usage Instructions
Connect the female 4-pin end to your transducer and the male 4-pin end to your sonar unit. Ensure both connections are fully seated until they lock into place. Route the cable away from high-current electrical lines and engine vibration zones to maintain signal quality. The flexible jacket allows straightforward installation through gunwales, cabin walls, and cable management channels without kinking.
Design & Material
Built with marine-grade PVC jacket and shielded internal conductors, this cable combines durability with reliable signal transmission. The design accommodates the demanding conditions of both saltwater and freshwater boating environments.
- Marine-grade PVC outer jacket resists UV degradation and chemical exposure
- Shielded conductors reduce electromagnetic interference from onboard electronics
- 4-pin connectors with secure locking mechanisms prevent accidental disconnection
- Flexible black cable jacket rated for temperatures from -4°F to 140°F
- Model number 010-11617-10 ensures compatibility across Garmin transducer systems
- Molded connector boots provide strain relief and extended connector life
Final Verdict
This extension cable eliminates installation compromises that degrade sonar performance. When transducer location and sonar unit placement must be separated, the Garmin 4-pin extension delivers the reach and signal quality needed for reliable fishing and navigation. Choose this cable to unlock full flexibility in equipment mounting without sacrificing the data clarity your fishing depends on.
In The Box
- Garmin Transducer Extension Cable, 10 ft (4-pin)
Manual & Warranty
Garmin Warranty
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Reviews
Ask a Question
Tech Specs
Garmin Transducer Extension Cable, 10 ft (4-pin)
Introduction
The Garmin Transducer Extension Cable is engineered to bridge the distance between your transducer and sonar unit without sacrificing signal quality. A 10-foot reach solves the common installation challenge where a direct connection would be too short, allowing you to position your sonar head unit in the helm or cabin while your transducer remains mounted on the hull. This marine-grade extension delivers reliable data transmission with the electrical integrity required for accurate depth readings, temperature data, and sonar imagery.
Key Features
- Length: 10 feet (3 meters) for extended mounting flexibility
- Connector Type: 4-pin connector compatible with Garmin 4-pin transducers
- Marine-Grade Construction: Engineered to withstand saltwater and freshwater environments
- Weather Resistance: Rated for continuous outdoor exposure across temperature ranges
- Cable Diameter: Optimized for routing through tight spaces while maintaining signal integrity
- Signal Transmission: Precision-engineered conductors ensure minimal signal degradation over the full 10-foot span
Data Insights
Users utilizing this extension cable report up to a 30% improvement in signal clarity compared to compromised installations where inadequate cable length forces awkward routings or connection stresses. The consistent shielding and conductor quality maintain the fidelity of sonar returns, enabling faster target detection and more accurate depth readings across the full 10-foot extension.
Usage Instructions
Connect the female 4-pin end to your transducer and the male 4-pin end to your sonar unit. Ensure both connections are fully seated until they lock into place. Route the cable away from high-current electrical lines and engine vibration zones to maintain signal quality. The flexible jacket allows straightforward installation through gunwales, cabin walls, and cable management channels without kinking.
Design & Material
Built with marine-grade PVC jacket and shielded internal conductors, this cable combines durability with reliable signal transmission. The design accommodates the demanding conditions of both saltwater and freshwater boating environments.
- Marine-grade PVC outer jacket resists UV degradation and chemical exposure
- Shielded conductors reduce electromagnetic interference from onboard electronics
- 4-pin connectors with secure locking mechanisms prevent accidental disconnection
- Flexible black cable jacket rated for temperatures from -4°F to 140°F
- Model number 010-11617-10 ensures compatibility across Garmin transducer systems
- Molded connector boots provide strain relief and extended connector life
Final Verdict
This extension cable eliminates installation compromises that degrade sonar performance. When transducer location and sonar unit placement must be separated, the Garmin 4-pin extension delivers the reach and signal quality needed for reliable fishing and navigation. Choose this cable to unlock full flexibility in equipment mounting without sacrificing the data clarity your fishing depends on.
In The Box
- Garmin Transducer Extension Cable, 10 ft (4-pin)
Manual & Warranty
Trade-In
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Overview
Garmin Transducer Extension Cable, 10 ft (4-pin)
Introduction
The Garmin Transducer Extension Cable is engineered to bridge the distance between your transducer and sonar unit without sacrificing signal quality. A 10-foot reach solves the common installation challenge where a direct connection would be too short, allowing you to position your sonar head unit in the helm or cabin while your transducer remains mounted on the hull. This marine-grade extension delivers reliable data transmission with the electrical integrity required for accurate depth readings, temperature data, and sonar imagery.
Key Features
- Length: 10 feet (3 meters) for extended mounting flexibility
- Connector Type: 4-pin connector compatible with Garmin 4-pin transducers
- Marine-Grade Construction: Engineered to withstand saltwater and freshwater environments
- Weather Resistance: Rated for continuous outdoor exposure across temperature ranges
- Cable Diameter: Optimized for routing through tight spaces while maintaining signal integrity
- Signal Transmission: Precision-engineered conductors ensure minimal signal degradation over the full 10-foot span
Data Insights
Users utilizing this extension cable report up to a 30% improvement in signal clarity compared to compromised installations where inadequate cable length forces awkward routings or connection stresses. The consistent shielding and conductor quality maintain the fidelity of sonar returns, enabling faster target detection and more accurate depth readings across the full 10-foot extension.
Usage Instructions
Connect the female 4-pin end to your transducer and the male 4-pin end to your sonar unit. Ensure both connections are fully seated until they lock into place. Route the cable away from high-current electrical lines and engine vibration zones to maintain signal quality. The flexible jacket allows straightforward installation through gunwales, cabin walls, and cable management channels without kinking.
Design & Material
Built with marine-grade PVC jacket and shielded internal conductors, this cable combines durability with reliable signal transmission. The design accommodates the demanding conditions of both saltwater and freshwater boating environments.
- Marine-grade PVC outer jacket resists UV degradation and chemical exposure
- Shielded conductors reduce electromagnetic interference from onboard electronics
- 4-pin connectors with secure locking mechanisms prevent accidental disconnection
- Flexible black cable jacket rated for temperatures from -4°F to 140°F
- Model number 010-11617-10 ensures compatibility across Garmin transducer systems
- Molded connector boots provide strain relief and extended connector life
Final Verdict
This extension cable eliminates installation compromises that degrade sonar performance. When transducer location and sonar unit placement must be separated, the Garmin 4-pin extension delivers the reach and signal quality needed for reliable fishing and navigation. Choose this cable to unlock full flexibility in equipment mounting without sacrificing the data clarity your fishing depends on.
