Garmin Trim Piece Snap Cover (GPSMAP 7x1 Series)
Garmin Trim Piece Snap Cover (GPSMAP 7x1 Series)
Model Number: 010-11976-00
In stock
WhatsApp
SMS - Text us!
Email Us!
Help Desk
Tech Specs
Garmin Trim Piece Snap Cover for GPSMAP 7x1 Series
Introduction
The Garmin Trim Piece Snap Cover (GPSMAP 7x1 Series) delivers practical protection and aesthetic refinement for your marine GPS device. This snap-on trim piece guards against scratches, UV degradation, and environmental wear while restoring a finished appearance to your GPSMAP 741 or GPSMAP 741xs. By creating a protective barrier between your device and the elements, this cover directly extends your equipment's operational lifespan and visual appeal without compromising functionality.
Key Features
- Compatible with GPSMAP 741 and GPSMAP 741xs models exclusively
- Snap-on installation with no tools required for rapid setup
- Weighs only 0.2 ounces, adding negligible bulk to your mounted device
- High-grade plastic construction rated for saltwater and freshwater environments
- Weather-resistant design engineered to withstand UV exposure and moisture
- Smooth finish that resists scratches and scuffing from normal handling
Data Insights
Properly maintained and protected marine electronics last approximately 30% longer than unprotected units. A trim cover like this addresses one of the primary failure points—exposed edges and mounting areas—where salt spray and UV rays accelerate material degradation. The snap-cover approach eliminates the cost and complexity of replacing your entire GPSMAP unit, making this a high-ROI protective measure for serious boaters who rely on consistent performance.
Usage Instructions
After mounting your GPSMAP device, align the Garmin Trim Piece with the device edges and press firmly until it snaps into place. Verify the cover sits flush around all sides. Periodically inspect the cover for salt deposits or visible wear, and rinse with fresh water to maintain its appearance and protective qualities.
Design & Material
The trim piece features a minimalist profile that complements the GPSMAP design language without adding visual bulk. Its understated approach integrates seamlessly with marine electronics setups, whether mounted on center consoles or hardtop frames.
- Material: High-grade thermoplastic engineered for salt-air resistance
- Finish: Smooth, non-reflective black surface that minimizes glare
- Craftsmanship: Precision-molded to tolerances that ensure a snug, rattle-free fit
- Color: Neutral black that coordinates with existing Garmin devices and installation
- Recyclable: Manufactured from environmentally responsible thermoplastic materials
- Model Number: 010-11976-00 for exact compatibility verification
Final Verdict
Protect your investment with a product engineered specifically for the GPSMAP 741 and GPSMAP 741xs. This trim cover combines proven durability with simple installation, delivering decades of extended device life. Order the Garmin Trim Piece Snap Cover today and preserve both the functionality and aesthetics of your marine electronics system.
In The Box
Garmin Accy,Bezel, GPSMAP7x1
Manual & Warranty
Garmin Warranty
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Reviews
Ask a Question
Tech Specs
Garmin Trim Piece Snap Cover for GPSMAP 7x1 Series
Introduction
The Garmin Trim Piece Snap Cover (GPSMAP 7x1 Series) delivers practical protection and aesthetic refinement for your marine GPS device. This snap-on trim piece guards against scratches, UV degradation, and environmental wear while restoring a finished appearance to your GPSMAP 741 or GPSMAP 741xs. By creating a protective barrier between your device and the elements, this cover directly extends your equipment's operational lifespan and visual appeal without compromising functionality.
Key Features
- Compatible with GPSMAP 741 and GPSMAP 741xs models exclusively
- Snap-on installation with no tools required for rapid setup
- Weighs only 0.2 ounces, adding negligible bulk to your mounted device
- High-grade plastic construction rated for saltwater and freshwater environments
- Weather-resistant design engineered to withstand UV exposure and moisture
- Smooth finish that resists scratches and scuffing from normal handling
Data Insights
Properly maintained and protected marine electronics last approximately 30% longer than unprotected units. A trim cover like this addresses one of the primary failure points—exposed edges and mounting areas—where salt spray and UV rays accelerate material degradation. The snap-cover approach eliminates the cost and complexity of replacing your entire GPSMAP unit, making this a high-ROI protective measure for serious boaters who rely on consistent performance.
Usage Instructions
After mounting your GPSMAP device, align the Garmin Trim Piece with the device edges and press firmly until it snaps into place. Verify the cover sits flush around all sides. Periodically inspect the cover for salt deposits or visible wear, and rinse with fresh water to maintain its appearance and protective qualities.
Design & Material
The trim piece features a minimalist profile that complements the GPSMAP design language without adding visual bulk. Its understated approach integrates seamlessly with marine electronics setups, whether mounted on center consoles or hardtop frames.
- Material: High-grade thermoplastic engineered for salt-air resistance
- Finish: Smooth, non-reflective black surface that minimizes glare
- Craftsmanship: Precision-molded to tolerances that ensure a snug, rattle-free fit
- Color: Neutral black that coordinates with existing Garmin devices and installation
- Recyclable: Manufactured from environmentally responsible thermoplastic materials
- Model Number: 010-11976-00 for exact compatibility verification
Final Verdict
Protect your investment with a product engineered specifically for the GPSMAP 741 and GPSMAP 741xs. This trim cover combines proven durability with simple installation, delivering decades of extended device life. Order the Garmin Trim Piece Snap Cover today and preserve both the functionality and aesthetics of your marine electronics system.
In The Box
Garmin Accy,Bezel, GPSMAP7x1
Manual & Warranty
Trade-In
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Overview
Garmin Trim Piece Snap Cover for GPSMAP 7x1 Series
Introduction
The Garmin Trim Piece Snap Cover (GPSMAP 7x1 Series) delivers practical protection and aesthetic refinement for your marine GPS device. This snap-on trim piece guards against scratches, UV degradation, and environmental wear while restoring a finished appearance to your GPSMAP 741 or GPSMAP 741xs. By creating a protective barrier between your device and the elements, this cover directly extends your equipment's operational lifespan and visual appeal without compromising functionality.
Key Features
- Compatible with GPSMAP 741 and GPSMAP 741xs models exclusively
- Snap-on installation with no tools required for rapid setup
- Weighs only 0.2 ounces, adding negligible bulk to your mounted device
- High-grade plastic construction rated for saltwater and freshwater environments
- Weather-resistant design engineered to withstand UV exposure and moisture
- Smooth finish that resists scratches and scuffing from normal handling
Data Insights
Properly maintained and protected marine electronics last approximately 30% longer than unprotected units. A trim cover like this addresses one of the primary failure points—exposed edges and mounting areas—where salt spray and UV rays accelerate material degradation. The snap-cover approach eliminates the cost and complexity of replacing your entire GPSMAP unit, making this a high-ROI protective measure for serious boaters who rely on consistent performance.
Usage Instructions
After mounting your GPSMAP device, align the Garmin Trim Piece with the device edges and press firmly until it snaps into place. Verify the cover sits flush around all sides. Periodically inspect the cover for salt deposits or visible wear, and rinse with fresh water to maintain its appearance and protective qualities.
Design & Material
The trim piece features a minimalist profile that complements the GPSMAP design language without adding visual bulk. Its understated approach integrates seamlessly with marine electronics setups, whether mounted on center consoles or hardtop frames.
- Material: High-grade thermoplastic engineered for salt-air resistance
- Finish: Smooth, non-reflective black surface that minimizes glare
- Craftsmanship: Precision-molded to tolerances that ensure a snug, rattle-free fit
- Color: Neutral black that coordinates with existing Garmin devices and installation
- Recyclable: Manufactured from environmentally responsible thermoplastic materials
- Model Number: 010-11976-00 for exact compatibility verification
Final Verdict
Protect your investment with a product engineered specifically for the GPSMAP 741 and GPSMAP 741xs. This trim cover combines proven durability with simple installation, delivering decades of extended device life. Order the Garmin Trim Piece Snap Cover today and preserve both the functionality and aesthetics of your marine electronics system.
