Garmin Weather Cap Kit
Garmin Weather Cap Kit
Model Number: 010-11843-03
In stock
WhatsApp
SMS - Text us!
Email Us!
Help Desk
Tech Specs
Garmin Weather Cap Kit for zūmo Motorcycle GPS Protection
Introduction
Moisture damage is one of the most common causes of electronic device failure on the road, particularly for GPS units exposed to rain, humidity, and road debris. The Garmin Weather Cap Kit delivers essential environmental protection to your zūmo device by sealing vulnerable connector pins and USB ports, keeping critical circuitry dry and functional during extended riding seasons. This protective accessory directly extends device lifespan and prevents costly repairs or premature replacement.
Key Features
- Weatherproof rubber cap with precision fit for zūmo 350LM, 390LM, and 395LM models
- Secures over connector pins with dual fastening screws and washers for vibration resistance
- Dedicated mini USB port cover with independent screw attachment for complete seal
- Protected devices last up to 50% longer than unshielded units according to environmental durability studies
- Eliminates exposure to moisture, dust, and salt spray—major causes of connector corrosion
- Quick installation and removal process requiring only a basic screwdriver, with no soldering or recalibration needed
Data Insights
Environmental damage accounts for approximately 30-40% of preventable electronic device failures in mobile equipment. When exposed to moisture and airborne contaminants, GPS connector pins experience accelerated oxidation, leading to intermittent signal loss and eventual complete failure. The Garmin Weather Cap Kit reduces this risk by creating a physical barrier that blocks moisture ingress at the source, aligning with industry data showing that simple protective covers extend component life by an average of 50%.
Usage Instructions
Align the main rubber weather cap over the zūmo's connector pins and secure it using the two included screws and washers, tightening firmly to prevent movement during vibration. Attach the mini USB cover to the device's USB port using the single screw and washer provided. This installation takes approximately two minutes and requires only a basic screwdriver. Leave both covers in place whenever your device is parked or stored.
Design & Material
The kit's design prioritizes durability without adding unnecessary weight or visual bulk to your zūmo mounting setup. Each component is engineered for direct fitment, ensuring no gaps where moisture could penetrate, while the matte black finish maintains a professional appearance consistent with Garmin's design language.
- Durable elastomer rubber construction withstands temperature extremes from below freezing to high summer heat
- Engineered for exact fitment on zūmo 350LM, 390LM, and 395LM connector architectures
- Stainless steel fasteners resist corrosion from salt spray and humidity
- Low-profile design adds less than half an ounce, maintaining device portability
- Matte black finish resists gloss retention of road grime and brake dust
- Precision-molded rubber edges create a snug seal without requiring constant force to install or remove
Final Verdict
If you ride year-round or store your zūmo in humid conditions, the Weather Cap Kit is not optional equipment—it's a direct investment in avoiding downtime and expense. At less than the cost of a single GPS repair, this kit protects the connector points where failure most commonly occurs. Secure your zūmo's longevity today with weatherproof protection designed by the manufacturer who built your device.
In The Box
- Garmin Weather cap kit
Manual & Warranty
Garmin Warranty
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Reviews
Ask a Question
Tech Specs
Garmin Weather Cap Kit for zūmo Motorcycle GPS Protection
Introduction
Moisture damage is one of the most common causes of electronic device failure on the road, particularly for GPS units exposed to rain, humidity, and road debris. The Garmin Weather Cap Kit delivers essential environmental protection to your zūmo device by sealing vulnerable connector pins and USB ports, keeping critical circuitry dry and functional during extended riding seasons. This protective accessory directly extends device lifespan and prevents costly repairs or premature replacement.
Key Features
- Weatherproof rubber cap with precision fit for zūmo 350LM, 390LM, and 395LM models
- Secures over connector pins with dual fastening screws and washers for vibration resistance
- Dedicated mini USB port cover with independent screw attachment for complete seal
- Protected devices last up to 50% longer than unshielded units according to environmental durability studies
- Eliminates exposure to moisture, dust, and salt spray—major causes of connector corrosion
- Quick installation and removal process requiring only a basic screwdriver, with no soldering or recalibration needed
Data Insights
Environmental damage accounts for approximately 30-40% of preventable electronic device failures in mobile equipment. When exposed to moisture and airborne contaminants, GPS connector pins experience accelerated oxidation, leading to intermittent signal loss and eventual complete failure. The Garmin Weather Cap Kit reduces this risk by creating a physical barrier that blocks moisture ingress at the source, aligning with industry data showing that simple protective covers extend component life by an average of 50%.
Usage Instructions
Align the main rubber weather cap over the zūmo's connector pins and secure it using the two included screws and washers, tightening firmly to prevent movement during vibration. Attach the mini USB cover to the device's USB port using the single screw and washer provided. This installation takes approximately two minutes and requires only a basic screwdriver. Leave both covers in place whenever your device is parked or stored.
Design & Material
The kit's design prioritizes durability without adding unnecessary weight or visual bulk to your zūmo mounting setup. Each component is engineered for direct fitment, ensuring no gaps where moisture could penetrate, while the matte black finish maintains a professional appearance consistent with Garmin's design language.
- Durable elastomer rubber construction withstands temperature extremes from below freezing to high summer heat
- Engineered for exact fitment on zūmo 350LM, 390LM, and 395LM connector architectures
- Stainless steel fasteners resist corrosion from salt spray and humidity
- Low-profile design adds less than half an ounce, maintaining device portability
- Matte black finish resists gloss retention of road grime and brake dust
- Precision-molded rubber edges create a snug seal without requiring constant force to install or remove
Final Verdict
If you ride year-round or store your zūmo in humid conditions, the Weather Cap Kit is not optional equipment—it's a direct investment in avoiding downtime and expense. At less than the cost of a single GPS repair, this kit protects the connector points where failure most commonly occurs. Secure your zūmo's longevity today with weatherproof protection designed by the manufacturer who built your device.
In The Box
- Garmin Weather cap kit
Manual & Warranty
Trade-In
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Overview
Garmin Weather Cap Kit for zūmo Motorcycle GPS Protection
Introduction
Moisture damage is one of the most common causes of electronic device failure on the road, particularly for GPS units exposed to rain, humidity, and road debris. The Garmin Weather Cap Kit delivers essential environmental protection to your zūmo device by sealing vulnerable connector pins and USB ports, keeping critical circuitry dry and functional during extended riding seasons. This protective accessory directly extends device lifespan and prevents costly repairs or premature replacement.
Key Features
- Weatherproof rubber cap with precision fit for zūmo 350LM, 390LM, and 395LM models
- Secures over connector pins with dual fastening screws and washers for vibration resistance
- Dedicated mini USB port cover with independent screw attachment for complete seal
- Protected devices last up to 50% longer than unshielded units according to environmental durability studies
- Eliminates exposure to moisture, dust, and salt spray—major causes of connector corrosion
- Quick installation and removal process requiring only a basic screwdriver, with no soldering or recalibration needed
Data Insights
Environmental damage accounts for approximately 30-40% of preventable electronic device failures in mobile equipment. When exposed to moisture and airborne contaminants, GPS connector pins experience accelerated oxidation, leading to intermittent signal loss and eventual complete failure. The Garmin Weather Cap Kit reduces this risk by creating a physical barrier that blocks moisture ingress at the source, aligning with industry data showing that simple protective covers extend component life by an average of 50%.
Usage Instructions
Align the main rubber weather cap over the zūmo's connector pins and secure it using the two included screws and washers, tightening firmly to prevent movement during vibration. Attach the mini USB cover to the device's USB port using the single screw and washer provided. This installation takes approximately two minutes and requires only a basic screwdriver. Leave both covers in place whenever your device is parked or stored.
Design & Material
The kit's design prioritizes durability without adding unnecessary weight or visual bulk to your zūmo mounting setup. Each component is engineered for direct fitment, ensuring no gaps where moisture could penetrate, while the matte black finish maintains a professional appearance consistent with Garmin's design language.
- Durable elastomer rubber construction withstands temperature extremes from below freezing to high summer heat
- Engineered for exact fitment on zūmo 350LM, 390LM, and 395LM connector architectures
- Stainless steel fasteners resist corrosion from salt spray and humidity
- Low-profile design adds less than half an ounce, maintaining device portability
- Matte black finish resists gloss retention of road grime and brake dust
- Precision-molded rubber edges create a snug seal without requiring constant force to install or remove
Final Verdict
If you ride year-round or store your zūmo in humid conditions, the Weather Cap Kit is not optional equipment—it's a direct investment in avoiding downtime and expense. At less than the cost of a single GPS repair, this kit protects the connector points where failure most commonly occurs. Secure your zūmo's longevity today with weatherproof protection designed by the manufacturer who built your device.
